Cette page n'est pas encore disponible en français, sa traduction est en cours.
Si vous avez des questions ou des retours sur notre projet de traduction actuel, n'hésitez pas à nous contacter.

Observability Pipelines is not available on the US1-FED Datadog site.

This guide is for large-scale production-level deployments.

Units for estimations

The following units are starting points for estimating your resource capacity, but can vary depending on your workload.

UnitSizeObservability Pipelines Worker Throughput*
Unstructured log event~512 bytes~10 MiB/s/vCPU
Structured log event~1.5 KB~25 MiB/s/vCPU
Metric event~256 bytes~25 MiB/s/vCPU
Trace span event~1.5 KB~25 MiB/s/vCPU

*These numbers are conservative for estimation purposes. 1 vCPU = 1 ARM physical CPU and 0.5 Intel physical CPU.

Scaling

Horizontal scaling

Horizontal scaling refers to distributing traffic across multiple Observability Pipelines Worker instances. Observability Pipelines Worker has a shared-nothing architecture and does not require leader nodes or any such coordination that could complicate scaling.

For push-based sources, front your Observability Pipelines Worker instances with a network load balancer and scale them up and down as needed.

A diagram showing a cloud region broken down into agents, network load balancers, and an Observability Pipelines Worker aggregator, and the data from the agents are sent to the load balancer, Observability Pipelines Workers, and then to other destinations

A load balancer is not required for pull-based sources. Deploy Observability Pipelines Worker and scale it up and down as needed. Your publish-subscription system coordinates exclusive access to the data when Observability Pipelines Worker asks to read it.

A diagram showing a cloud region broken down into agents, brokers, and an Observability Pipelines aggregator. Data from the agents are sent to the brokers, and then sent and received between the broker and the Observability Pipelines Workers, and then sent from the Workers out to the other destinations

See Advanced configurations for more information on mixed workloads (push and pull-based sources).

Load balancing

A load balancer is only required for push-based sources, such as agents. You do not need a load balancer if you are exclusively using pull-based sources, such as Kafka.

Client-side load balancing

Client-side load balancing is not recommended. Client-side load balancing refers to clients doing the load balancing of traffic across multiple Observability Pipelines Worker instances. While this approach sounds simpler, it may be less reliable and more complicated because:

  • Load balancing with proper failover is complex. Issues in this area are sensitive as they can result in data loss or incidents that disrupt your services. This is exacerbated if you are working with multiple types of clients.
  • The point of the Observability Pipelines Worker aggregator is to shift responsibility away from your agents and taking on load balancing helps to do that.
Load balancer types

Datadog recommends Layer 4 (L4) load balancers (network load balancers) since they support Observability Pipelines Worker’s protocols (TCP, UDP, and HTTP). Even if you’re exclusively sending HTTP traffic (Layer 7), Datadog recommends L4 load balancers for their performance and simplicity.

Cloud ProviderRecommendation
AWSAWS Network Load Balancer (NLB)
AzureInternal Azure Load Balancer
Google CloudInternal TCP/UDP Network Load Balancer
PrivateHAProxy, Nginx, or another load balancer with layer-4 support
Load balancer configurations

When configuring clients and load balancers, Datadog recommends the following general settings:

  • Use a simple round-robin load balancing strategy.
  • Do not enable cross-zone load balancing unless the traffic across zones is very imbalanced.
  • Configure load balancers to use Observability Pipelines Worker’s health API endpoint for target health.
  • Ensure that your Observability Pipelines Worker instances automatically register or de-register as they scale. See Networking for more information.
  • Enable keep-alive with no more than one minute idle timeout for both your clients and load balancers.
  • If supported, enable connection concurrency and pooling on your agents. If that is not supported, consider the unified architecture which deploys Observability Pipelines Worker at the edge. Connection pooling ensures large volumes of data are spread across multiple connections to help balance traffic.
Load balancer hot spots

Load balancing hot spots occur when one or more Observability Pipelines Worker instance receives disproportionate traffic. Hot spots usually happen due to one of two reasons:

  1. A substantial amount of traffic is being sent over a single connection.
  2. Traffic in one availability zone is much higher than in the others.

In these cases, the following respective mitigation tactics are recommended:

  1. Split large connections into multiple connections. Most clients allow connection concurrency and pooling that distributes data over multiple connections. This tactic allows your load balancer to distribute the connection across multiple Observability Pipelines Worker instances. If your client does not support this, consider the unified architecture, where Observability Pipelines Worker can be additionally deployed to the edge.
  2. Enable cross-zone load balancing on your load balancer. Cross-zone balancing balances all availability zone traffic across all Observability Pipelines Worker instances.

Vertical scaling

Observability Pipelines Worker’s concurrency model automatically scales to take advantage of all vCPUs. There are no concurrency settings or configuration changes required. When vertically scaling, Datadog recommends capping an instance’s size to process no more than 50% of your total volume and deploying at least two Observability Pipelines Worker instances for high availability.

Autoscaling

Autoscaling should be based on average CPU utilization. For the vast majority of workloads, Observability Pipelines Worker is CPU constrained. CPU utilization is the strongest signal for autoscaling since it does not produce false positives. Datadog recommends you use the following settings, adjusting as necessary:

  • Average CPU with a 85% utilization target.
  • A five minute stabilization period for scaling up and down.
PREVIEWING: alai97/reorganize-some-sections-in-dora-metrics