Supported OS Linux Windows Mac OS

インテグレーションバージョン2.2.2

概要

このチェックは、Datadog Agent を通じて Pulsar を監視します。

セットアップ

ホストで実行されている Agent 用にこのチェックをインストールおよび構成する場合は、以下の手順に従ってください。コンテナ環境の場合は、オートディスカバリーのインテグレーションテンプレートのガイドを参照してこの手順を行ってください。

インストール

Pulsar チェックは Datadog Agent パッケージに含まれています。 サーバーに追加でインストールする必要はありません。

構成

  1. pulsar のパフォーマンスデータの収集を開始するには、Agent のコンフィギュレーションディレクトリのルートにある conf.d/ フォルダーの pulsar.d/conf.yaml ファイルを編集します。使用可能なすべてのコンフィギュレーションオプションの詳細については、pulsar.d/conf.yaml のサンプルを参照してください。

  2. Agent を再起動します

検証

Agent の status サブコマンドを実行し、Checks セクションで pulsar を探します。

収集データ

メトリクス

pulsar.active_connections
(gauge)
The number of active connections.
Shown as connection
pulsar.authentication_failures_count.count
(count)
The number of failing authentication operations.
pulsar.authentication_success_count.count
(count)
The number of successful authentication operations.
pulsar.bookie_DELETED_LEDGER_COUNT.count
(count)
The total number of ledgers deleted since the bookie has started.
pulsar.bookie_READ_BYTES.count
(count)
The total number of bytes read from the bookie.
Shown as byte
pulsar.bookie_SERVER_STATUS
(gauge)
The server status for bookie server. 1: the bookie is running in writable mode.0: the bookie is running in readonly mode.
pulsar.bookie_WRITE_BYTES.count
(count)
The total number of bytes written to the bookie.
Shown as byte
pulsar.bookie_entries_count
(gauge)
The total number of entries stored in the bookie.
pulsar.bookie_flush
(gauge)
The table flush latency of bookie memory.
pulsar.bookie_journal_JOURNAL_CB_QUEUE_SIZE
(gauge)
The total number of callbacks pending in the callback queue.
pulsar.bookie_journal_JOURNAL_FORCE_WRITE_QUEUE_SIZE
(gauge)
The total number of force write (fsync) requests pending in the force-write queue.
Shown as request
pulsar.bookie_journal_JOURNAL_QUEUE_SIZE
(gauge)
The total number of requests pending in the journal queue.
Shown as request
pulsar.bookie_journal_JOURNAL_SYNC_count.count
(count)
The total number of journal fsync operations happening at the bookie. The success label is used to distinguish successes and failures.
pulsar.bookie_ledger_writable_dirs
(gauge)
The number of writable directories in the bookie.
pulsar.bookie_ledgers_count
(gauge)
The total number of ledgers stored in the bookie.
pulsar.bookie_read_cache_size
(gauge)
The bookie read cache size (in bytes).
Shown as byte
pulsar.bookie_throttled_write_requests.count
(count)
The number of write requests to be throttled.
Shown as request
pulsar.bookie_write_cache_size
(gauge)
The bookie write cache size (in bytes).
Shown as byte
pulsar.bookkeeper_server_ADD_ENTRY_count.count
(count)
The total number of ADD_ENTRY requests received at the bookie. The success label is used to distinguish successes and failures.
Shown as request
pulsar.bookkeeper_server_BOOKIE_QUARANTINE_count.count
(count)
The number of bookie clients to be quarantined.
pulsar.bookkeeper_server_READ_ENTRY_count.count
(count)
The total number of READ_ENTRY requests received at the bookie. The success label is used to distinguish successes and failures.
Shown as request
pulsar.brk_ml_cursor_nonContiguousDeletedMessagesRange
(gauge)
The number of non-contiguous deleted messages ranges.
pulsar.brk_ml_cursor_persistLedgerErrors
(gauge)
The number of ledger errors occurred when acknowledgment states fail to be persistent to the ledger.
Shown as error
pulsar.brk_ml_cursor_persistLedgerSucceed
(gauge)
The number of acknowledgment states that is persistent to a ledger.
pulsar.brk_ml_cursor_persistZookeeperErrors
(gauge)
The number of ledger errors occurred when acknowledgment states fail to be persistent to ZooKeeper.
Shown as error
pulsar.brk_ml_cursor_persistZookeeperSucceed
(gauge)
The number of acknowledgment states that is persistent to ZooKeeper.
pulsar.brk_ml_cursor_readLedgerSize
(gauge)
The size of read from ledger.
pulsar.brk_ml_cursor_writeLedgerLogicalSize
(gauge)
The size of write to ledger (accounting for without replicas).
pulsar.brk_ml_cursor_writeLedgerSize
(gauge)
The size of write to ledger.
pulsar.broker_load_manager_bundle_assignment
(gauge)
The summary of latency of bundles ownership operations.
pulsar.broker_lookup.count
(count)
Number of samples of the latency of all lookup operations.
pulsar.broker_lookup.quantle
(count)
Latency of all lookup operations.
pulsar.broker_lookup.sum
(count)
Total latency of all lookup operations.
pulsar.broker_lookup_answers.count
(count)
The number of lookup responses (i.e. not redirected requests).
Shown as response
pulsar.broker_lookup_failures.count
(count)
The number of lookup failures.
pulsar.broker_lookup_pending_requests
(gauge)
The number of pending lookups in broker. When it is up to the threshold, new requests are rejected.
Shown as request
pulsar.broker_lookup_redirects.count
(count)
The number of lookup redirected requests.
Shown as request
pulsar.broker_throttled_connections
(gauge)
The number of throttled connections.
Shown as connection
pulsar.broker_throttled_connections_global_limit
(gauge)
The number of throttled connections because of per-connection limit.
Shown as connection
pulsar.broker_topic_load_pending_requests
(gauge)
The load of pending topic operations.
pulsar.bundle_consumer_count
(gauge)
The consumer count of the topics in this bundle.
pulsar.bundle_msg_rate_in
(gauge)
The total message rate coming into the topics in this bundle (messages/second).
pulsar.bundle_msg_rate_out
(gauge)
The total message rate going out from the topics in this bundle (messages/second).
pulsar.bundle_msg_throughput_in
(gauge)
The total throughput coming into the topics in this bundle (bytes/second).
pulsar.bundle_msg_throughput_out
(gauge)
The total throughput going out from the topics in this bundle (bytes/second).
pulsar.bundle_producer_count
(gauge)
The producer count of the topics in this bundle.
pulsar.bundle_topics_count
(gauge)
The topic count in this bundle.
pulsar.compaction_compacted_entries_count
(gauge)
The total number of the compacted entries.
pulsar.compaction_compacted_entries_size
(gauge)
The total size of the compacted entries.
pulsar.compaction_duration_time_in_mills
(gauge)
The duration time of the compaction.
pulsar.compaction_failed_count
(gauge)
The total number of failures of the compaction.
pulsar.compaction_read_throughput
(gauge)
The read throughput of the compaction.
pulsar.compaction_removed_event_count
(gauge)
The total number of removed events of the compaction.
pulsar.compaction_succeed_count
(gauge)
The total number of successes of the compaction.
pulsar.compaction_write_throughput
(gauge)
The write throughput of the compaction.
pulsar.connection_closed_total_count
(gauge)
The total number of closed connections.
Shown as connection
pulsar.connection_create_fail_count
(gauge)
The number of failed connections.
Shown as connection
pulsar.connection_create_success_count
(gauge)
The number of successfully created connections.
Shown as connection
pulsar.connection_created_total_count
(gauge)
The total number of connections.
Shown as connection
pulsar.consumer_available_permits
(gauge)
The available permits for for a consumer.
pulsar.consumer_blocked_on_unacked_messages
(gauge)
Indicate whether a consumer is blocked on unacknowledged messages or not. 1 means the consumer is blocked on waiting unacknowledged messages to be acked.0 means the consumer is not blocked on waiting unacknowledged messages to be acked.
pulsar.consumer_msg_rate_out
(gauge)
The total message dispatch rate for a consumer (messages/second).
pulsar.consumer_msg_rate_redeliver
(gauge)
The total message rate for message being redelivered (messages/second).
pulsar.consumer_msg_throughput_out
(gauge)
The total message dispatch throughput for a consumer (bytes/second).
pulsar.consumer_unacked_messages
(gauge)
The total number of unacknowledged messages of a consumer (messages).
Shown as message
pulsar.consumers_count
(gauge)
The number of active consumers of the namespace connected to this broker.
pulsar.expired_token_count.count
(count)
The number of expired tokens in Pulsar.
pulsar.function_last_invocation
(gauge)
The timestamp of the last invocation of the function.
pulsar.function_processed_successfully_total.count
(count)
The total number of messages processed successfully.
Shown as message
pulsar.function_processed_successfully_total_1min.count
(count)
The total number of messages processed successfully in the last 1 minute.
Shown as message
pulsar.function_received_total.count
(count)
The total number of messages received from source.
Shown as message
pulsar.function_received_total_1min.count
(count)
The total number of messages received from source in the last 1 minute.
Shown as message
pulsar.function_system_exceptions_total.count
(count)
The total number of system exceptions.
pulsar.function_system_exceptions_total_1min.count
(count)
The total number of system exceptions in the last 1 minute.
pulsar.function_user_exceptions_total.count
(count)
The total number of user exceptions.
pulsar.function_user_exceptions_total_1min.count
(count)
The total number of user exceptions in the last 1 minute.
pulsar.in_bytes_total
(gauge)
The number of messages in bytes received for this topic.
Shown as byte
pulsar.in_messages_total
(gauge)
The total number of messages received for this topic.
Shown as message
pulsar.jetty_async_dispatches_total.count
(count)
Number of requested that have been asynchronously dispatched.
pulsar.jetty_async_requests_total.count
(count)
Total number of async requests.
Shown as request
pulsar.jetty_async_requests_waiting
(gauge)
Currently waiting async requests.
Shown as request
pulsar.jetty_async_requests_waiting_max
(gauge)
Maximum number of waiting async requests.
Shown as request
pulsar.jetty_dispatched_active
(gauge)
Number of dispatches currently active.
pulsar.jetty_dispatched_active_max
(gauge)
Maximum number of active dispatches being handled.
pulsar.jetty_dispatched_time_max
(gauge)
Maximum time spent in dispatch handling.
pulsar.jetty_dispatched_time_seconds_total.count
(count)
Total time spent in dispatch handling.
Shown as second
pulsar.jetty_dispatched_total.count
(count)
Number of dispatches.
pulsar.jetty_expires_total.count
(count)
Number of async requests requests that have expired.
Shown as request
pulsar.jetty_request_time_max_seconds
(gauge)
Maximum time spent handling requests.
Shown as second
pulsar.jetty_request_time_seconds_total.count
(count)
Total time spent in all request handling.
Shown as second
pulsar.jetty_requests_active
(gauge)
Number of requests currently active.
Shown as request
pulsar.jetty_requests_active_max
(gauge)
Maximum number of requests that have been active at once.
Shown as request
pulsar.jetty_requests_total.count
(count)
Number of requests.
Shown as request
pulsar.jetty_responses_bytes_total.count
(count)
Total number of bytes across all responses.
Shown as byte
pulsar.jetty_responses_total.count
(count)
Number of responses, labeled by status code. The code label can be "1xx", "2xx", "3xx", "4xx", or "5xx".
Shown as response
pulsar.jetty_stats_seconds
(gauge)
Time in seconds stats have been collected for.
Shown as second
pulsar.lb_bandwidth_in_usage
(gauge)
The broker inbound bandwith usage (in percent).
pulsar.lb_bandwidth_out_usage
(gauge)
The broker outbound bandwith usage (in percent).
pulsar.lb_bundles_split_count.count
(count)
bundle split count in this bundle splitting check interval
pulsar.lb_cpu_usage
(gauge)
The broker cpu usage (in percent).
pulsar.lb_directMemory_usage
(gauge)
The broker process direct memory usage (in percent).
pulsar.lb_memory_usage
(gauge)
The broker process memory usage (in percent).
pulsar.lb_unload_broker_count.count
(count)
Unload broker count in this bundle unloading
pulsar.lb_unload_bundle_count.count
(count)
Bundle unload count in this bundle unloading
pulsar.ml_AddEntryBytesRate
(gauge)
The bytes/s rate of messages added
pulsar.ml_AddEntryErrors
(gauge)
The number of addEntry requests that failed
Shown as request
pulsar.ml_AddEntryMessagesRate
(gauge)
The msg/s rate of messages added
pulsar.ml_AddEntrySucceed
(gauge)
The number of addEntry requests that succeeded
Shown as request
pulsar.ml_AddEntryWithReplicasBytesRate
(gauge)
The bytes/s rate of messages added with replicas
pulsar.ml_MarkDeleteRate
(gauge)
The rate of mark-delete ops/s
pulsar.ml_NumberOfMessagesInBacklog
(gauge)
The number of backlog messages for all the consumers
Shown as message
pulsar.ml_ReadEntriesBytesRate
(gauge)
The bytes/s rate of messages read
pulsar.ml_ReadEntriesErrors
(gauge)
The number of readEntries requests that failed
Shown as request
pulsar.ml_ReadEntriesRate
(gauge)
The msg/s rate of messages read
pulsar.ml_ReadEntriesSucceeded
(gauge)
The number of readEntries requests that succeeded
Shown as request
pulsar.ml_StoredMessagesSize
(gauge)
The total size of the messages in active ledgers (accounting for the multiple copies stored)
pulsar.ml_cache_evictions
(gauge)
The number of cache evictions during the last minute.
Shown as eviction
pulsar.ml_cache_hits_rate
(gauge)
The number of cache hits per second on the broker side.
Shown as hit
pulsar.ml_cache_hits_throughput
(gauge)
The amount of data is retrieved from the cache on the broker side (in byte/s).
pulsar.ml_cache_misses_rate
(gauge)
The number of cache misses per second on the broker side.
Shown as miss
pulsar.ml_cache_misses_throughput
(gauge)
The amount of data is not retrieved from the cache on the broker side (in byte/s).
pulsar.ml_cache_pool_active_allocations
(gauge)
The number of currently active allocations in direct arena
pulsar.ml_cache_pool_active_allocations_huge
(gauge)
The number of currently active huge allocation in direct arena
pulsar.ml_cache_pool_active_allocations_normal
(gauge)
The number of currently active normal allocations in direct arena
pulsar.ml_cache_pool_active_allocations_small
(gauge)
The number of currently active small allocations in direct arena
pulsar.ml_cache_pool_allocated
(gauge)
The total allocated memory of chunk lists in direct arena
pulsar.ml_cache_pool_used
(gauge)
The total used memory of chunk lists in direct arena
pulsar.ml_cache_used_size
(gauge)
The size in byte used to store the entries payloads
Shown as byte
pulsar.ml_count
(gauge)
The number of currently opened managed ledgers
pulsar.out_bytes_total
(gauge)
The total number of messages in bytes read from this topic.
Shown as byte
pulsar.out_messages_total
(gauge)
The total number of messages read from this topic.
Shown as message
pulsar.producers_count
(gauge)
The number of active producers of the namespace connected to this broker.
pulsar.proxy_active_connections
(gauge)
Number of connections currently active in the proxy.
Shown as connection
pulsar.proxy_binary_bytes.count
(count)
Counter of proxy bytes.
Shown as byte
pulsar.proxy_binary_ops.count
(count)
Counter of proxy operations.
pulsar.proxy_new_connections.count
(count)
Counter of connections being opened in the proxy.
Shown as connection
pulsar.proxy_rejected_connections.count
(count)
Counter for connections rejected due to throttling.
Shown as connection
pulsar.rate_in
(gauge)
The total message rate of the namespace coming into this broker (messages/second).
pulsar.rate_out
(gauge)
The total message rate of the namespace going out from this broker (messages/second).
pulsar.replication_backlog
(gauge)
The total backlog of the namespace replicating to remote cluster (messages).
Shown as message
pulsar.replication_connected_count
(gauge)
The count of replication-subscriber up and running to replicate to remote cluster.
pulsar.replication_delay_in_seconds
(gauge)
Time in seconds from the time a message was produced to the time when it is about to be replicated.
Shown as second
pulsar.replication_rate_expired
(gauge)
Total rate of messages expired (messages/second).
pulsar.replication_rate_in
(gauge)
The total message rate of the namespace replicating from remote cluster (messages/second).
pulsar.replication_rate_out
(gauge)
The total message rate of the namespace replicating to remote cluster (messages/second).
pulsar.replication_throughput_in
(gauge)
The total throughput of the namespace replicating from remote cluster (bytes/second).
pulsar.replication_throughput_out
(gauge)
The total throughput of the namespace replicating to remote cluster (bytes/second).
pulsar.sink_last_invocation
(gauge)
The timestamp of the last invocation of the sink.
pulsar.sink_received_total.count
(count)
The total number of records that a sink has received from Pulsar topics.
pulsar.sink_received_total_1min.count
(count)
The total number of messages that a sink has received from Pulsar topics in the last 1 minute.
Shown as message
pulsar.sink_sink_exception
(gauge)
The exception from a sink.
pulsar.sink_sink_exceptions_total.count
(count)
The total number of sink exceptions.
pulsar.sink_sink_exceptions_total_1min.count
(count)
The total number of sink exceptions in the last 1 minute.
pulsar.sink_system_exception
(gauge)
The exception from system code.
pulsar.sink_system_exceptions_total.count
(count)
The total number of system exceptions.
pulsar.sink_system_exceptions_total_1min.count
(count)
The total number of system exceptions in the last 1 minute.
pulsar.sink_written_total.count
(count)
The total number of records processed by a sink.
pulsar.sink_written_total_1min.count
(count)
The total number of records processed by a sink in the last 1 minute.
pulsar.source_last_invocation
(gauge)
The timestamp of the last invocation of the source.
pulsar.source_received_total.count
(count)
The total number of records received from source.
pulsar.source_received_total_1min.count
(count)
The total number of records received from source in the last 1 minute.
pulsar.source_source_exception
(gauge)
The exception from a source.
pulsar.source_source_exceptions_total.count
(count)
The total number of source exceptions.
pulsar.source_source_exceptions_total_1min.count
(count)
The total number of source exceptions in the last 1 minute.
pulsar.source_system_exception
(gauge)
The exception from system code.
pulsar.source_system_exceptions_total.count
(count)
The total number of system exceptions.
pulsar.source_system_exceptions_total_1min.count
(count)
The total number of system exceptions in the last 1 minute.
pulsar.source_written_total.count
(count)
The total number of records written to a Pulsar topic.
pulsar.source_written_total_1min.count
(count)
The total number of records written to a Pulsar topic in the last 1 minute.
pulsar.split_bytes_read.count
(count)
Number of bytes read from BookKeeper.
Shown as byte
pulsar.split_num_messages_deserialized.count
(count)
Number of messages deserialized.
Shown as message
pulsar.split_num_record_deserialized.count
(count)
Number of records deserialized.
pulsar.storage_backlog_quota_limit
(gauge)
The total amount of the data in this topic that limit the backlog quota (bytes).
Shown as byte
pulsar.storage_backlog_size
(gauge)
The total backlog size of the topics of this namespace owned by this broker (messages).
pulsar.storage_logical_size
(gauge)
The storage size of topics in the namespace owned by the broker without replicas (in bytes).
pulsar.storage_offloaded_size
(gauge)
The total amount of the data in this namespace offloaded to the tiered storage (bytes).
pulsar.storage_read_rate
(gauge)
The total message batches (entries) read from the storage for this namespace (message batches / second).
pulsar.storage_size
(gauge)
The total storage size of the topics in this namespace owned by this broker (bytes).
pulsar.storage_write_rate
(gauge)
The total message batches (entries) written to the storage for this namespace (message batches / second).
pulsar.subscription_back_log
(gauge)
The total backlog of a subscription (messages).
Shown as message
pulsar.subscription_blocked_on_unacked_messages
(gauge)
Indicate whether a subscription is blocked on unacknowledged messages or not. 1 means the subscription is blocked on waiting unacknowledged messages to be acked.0 means the subscription is not blocked on waiting unacknowledged messages to be acked.
pulsar.subscription_delayed
(gauge)
The total message batches (entries) are delayed for dispatching.
pulsar.subscription_msg_rate_out
(gauge)
The total message dispatch rate for a subscription (messages/second).
pulsar.subscription_msg_rate_redeliver
(gauge)
The total message rate for message being redelivered (messages/second).
pulsar.subscription_msg_throughput_out
(gauge)
The total message dispatch throughput for a subscription (bytes/second).
pulsar.subscription_unacked_messages
(gauge)
The total number of unacknowledged messages of a subscription (messages).
Shown as message
pulsar.subscriptions_count
(gauge)
The number of Pulsar subscriptions of the namespace served by this broker.
pulsar.throughput_in
(gauge)
The total throughput of the namespace coming into this broker (bytes/second).
pulsar.throughput_out
(gauge)
The total throughput of the namespace going out from this broker (bytes/second).
pulsar.topics_count
(gauge)
The number of Pulsar topics of the namespace owned by this broker.
pulsar.txn_aborted_count.count
(count)
Number of aborted transactions of this coordinator.
Shown as transaction
pulsar.txn_active_count
(gauge)
Number of active transactions.
Shown as transaction
pulsar.txn_append_log_count.count
(count)
Number of append transaction logs.
pulsar.txn_committed_count.count
(count)
Number of committed transactions.
Shown as transaction
pulsar.txn_created_count.count
(count)
Number of created transactions.
Shown as transaction
pulsar.txn_timeout_count.count
(count)
Number of timeout transactions.
Shown as transaction

ログ収集

  1. Pulsar ログインテグレーションは、Pulsar のデフォルトログフォーマットをサポートします。異なるフォーマットがある場合は、インテグレーションパイプラインを複製し、編集してください。

  2. Datadog Agent で、ログの収集はデフォルトで無効になっています。以下のように、datadog.yaml ファイルでこれを有効にします。

    logs_enabled: true
    
  3. pulsar.d/conf.yaml ファイルのコメントを解除して、ログコンフィギュレーションブロックを編集します。環境に基づいて、パスパラメーターの値を変更してください。使用可能なすべてのコンフィギュレーションオプションの詳細については、pulsar.d/conf.yaml のサンプルを参照してください。

     logs:
       - type: file
         path: /pulsar/logs/pulsar.log
         source: pulsar
    
  4. Agent を再起動します

イベント

Pulsar インテグレーションには、イベントは含まれません。

サービスチェック

pulsar.openmetrics.health
Returns CRITICAL if the Agent is unable to connect to the OpenMetrics endpoint, otherwise returns OK.
Statuses: ok, critical

トラブルシューティング

ご不明な点は、Datadog のサポートチームまでお問合せください。

PREVIEWING: alai97/reorganize-some-sections-in-dora-metrics