Cette page n'est pas encore disponible en français, sa traduction est en cours. Si vous avez des questions ou des retours sur notre projet de traduction actuel, n'hésitez pas à nous contacter.
Add outbound (egress) rules to a security group.
Inputs
Expand All
Champ
Type
Description
region [required]
enum
default: us-east-1
groupId
string
The ID of the security group.
ipPermissions [required]
[object]
Sets of IP permissions. Specifying a destination security group and a CIDR IP address range in the same set of permissions is not supported.
FromPort
number
The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
IpProtocol
string
The IP protocol name (tcp, udp, icmp, icmpv6) or number (see Protocol Numbers). [VPC only] Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp, udp, icmp, or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp, udp, and icmp, you must specify a port range. For icmpv6, the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
IpRanges
[object]
The IPv4 address ranges.
CidrIp
string
The IPv4 address range. You can either specify a CIDR block or a source security group, not both. To specify a single IPv4 address, use the /32 prefix length.
Description
string
A description for the security group rule that references this IPv4 address range. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*.
Ipv6Ranges
[object]
The IPv6 address ranges.
CidrIpv6
string
The IPv6 address range. You can either specify a CIDR block or a source security group, not both. To specify a single IPv6 address, use the /128 prefix length.
Description
string
A description for the security group rule that references this IPv6 address range. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=&;{}!$*.
PrefixListIds
[object]
The prefix list IDs.
Description
string
A description for the security group rule that references this prefix list ID. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*.
PrefixListId
string
The ID of the prefix.
ToPort
number
The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
UserIdGroupPairs
[object]
The security group and Amazon Web Services account ID pairs.
Description
string
A description for the security group rule that references this user ID group pair. Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-:/()#,@[]+=;{}!$*.
GroupId
string
The ID of the security group.
GroupName
string
[Default VPC] The name of the security group. For a security group in a nondefault VPC, use the security group ID. For a referenced security group in another VPC, this value is not returned if the referenced security group is deleted.
PeeringStatus
string
The status of a VPC peering connection, if applicable.
UserId
string
The ID of an Amazon Web Services account. For a referenced security group in another VPC, the account ID of the referenced security group is returned in the response. If the referenced security group is deleted, this value is not returned. [EC2-Classic] Required when adding or removing rules that reference a security group in another Amazon Web Services account.
VpcId
string
The ID of the VPC for the referenced security group, if applicable.
VpcPeeringConnectionId
string
The ID of the VPC peering connection, if applicable.
Outputs
Expand All
Champ
Type
Description
securityGroupRuleSet [required]
[object]
SecurityGroupRuleId
string
The ID of the security group rule.
GroupId
string
The ID of the security group.
GroupOwnerId
string
The ID of the Amazon Web Services account that owns the security group.
IsEgress
boolean
Indicates whether the security group rule is an outbound rule.
IpProtocol
string
The IP protocol name (tcp, udp, icmp, icmpv6) or number (see Protocol Numbers). Use -1 to specify all protocols.
FromPort
number
The start of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type. A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
ToPort
number
The end of port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes. If you specify all ICMP/ICMPv6 types, you must specify all codes.
CidrIpv4
string
The IPv4 CIDR range.
CidrIpv6
string
The IPv6 CIDR range.
PrefixListId
string
The ID of the prefix list.
ReferencedGroupInfo
object
Describes the security group that is referenced in the rule.
GroupId
string
The ID of the security group.
PeeringStatus
string
The status of a VPC peering connection, if applicable.
UserId
string
The Amazon Web Services account ID.
VpcId
string
The ID of the VPC.
VpcPeeringConnectionId
string
The ID of the VPC peering connection (if applicable).
Description
string
The security group rule description.
Tags
[object]
The tags applied to the security group rule.
Key
string
The key of the tag. Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws:.
Value
string
The value of the tag. Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.