aws.elasticache.active_defrag_hits
(gauge) | Redis - The number of value reallocations per minute performed by the active defragmentation process. |
aws.elasticache.bytes_read_into_memcached
(count) | Memcached - The number of bytes that have been read from the network by the cache node.
Shown as byte |
aws.elasticache.bytes_used_for_cache
(gauge) | Redis - The total number of bytes allocated by Redis.
Shown as byte |
aws.elasticache.bytes_used_for_cache_items
(gauge) | Memcached - The number of bytes used to store cache items.
Shown as byte |
aws.elasticache.bytes_used_for_hash
(gauge) | Memcached - The number of bytes currently used by hash tables.
Shown as byte |
aws.elasticache.bytes_written_out_from_memcached
(count) | Memcached - The number of bytes that have been written to the network by the cache node.
Shown as byte |
aws.elasticache.cache_hit_rate
(gauge) | Redis - Indicates the usage efficiency of the Redis instance.
Shown as percent |
aws.elasticache.cache_hits
(count) | Redis - The number of successful key lookups.
Shown as hit |
aws.elasticache.cache_misses
(count) | Redis - The number of unsuccessful key lookups.
Shown as miss |
aws.elasticache.cas_badval
(count) | Memcached - The number of CAS (check and set) requests the cache has received where the Cas value did not match the Cas value stored.
Shown as request |
aws.elasticache.cas_hits
(count) | Memcached - The number of CAS requests the cache has received where the requested key was found and the Cas value matched.
Shown as hit |
aws.elasticache.cas_misses
(count) | Memcached - The number of CAS requests the cache has received where the key requested was not found.
Shown as miss |
aws.elasticache.cluster_count
(count) | The number of Elasticache clusters. |
aws.elasticache.cmd_config_get
(count) | Memcached - The cumulative number of config get requests.
Shown as get |
aws.elasticache.cmd_config_set
(count) | Memcached - The cumulative number of config set requests.
Shown as set |
aws.elasticache.cmd_flush
(count) | Memcached - The number of flush commands the cache has received.
Shown as flush |
aws.elasticache.cmd_get
(count) | Memcached - The number of get commands the cache has received.
Shown as get |
aws.elasticache.cmd_set
(count) | Memcached - The number of set commands the cache has received.
Shown as set |
aws.elasticache.cmd_touch
(count) | Memcached - The cumulative number of touch requests.
Shown as request |
aws.elasticache.cpucredit_balance
(gauge) | The number of earned CPU credits that an instance has accrued since it was launched or started.
Shown as unit |
aws.elasticache.cpucredit_usage
(gauge) | The number of CPU credits spent by the instance for CPU utilization.
Shown as unit |
aws.elasticache.cpuutilization
(gauge) | The percentage of CPU utilization for the server.
Shown as percent |
aws.elasticache.curr_config
(gauge) | Memcached - The current number of configurations stored. |
aws.elasticache.curr_connections
(gauge) | Redis - The number of client connections, excluding connections from read replicas. Memcached - A count of the number of connections connected to the cache at an instant in time.
Shown as connection |
aws.elasticache.curr_items
(gauge) | Redis - The number of items in the cache. This is derived from the Redis keyspace statistic, summing all of the keys in the entire keyspace. Memcached - A count of the number of items currently stored in the cache.
Shown as item |
aws.elasticache.database_memory_usage_percentage
(gauge) | Redis - The percentage of the memory available for the cluster that is in use.
Shown as percent |
aws.elasticache.db_0average_ttl
(gauge) | Redis - Exposes avg_ttl of DBO from the keyspace statistic of the Redis INFO command.
Shown as millisecond |
aws.elasticache.decr_hits
(count) | Memcached - The number of decrement requests the cache has received where the requested key was found.
Shown as hit |
aws.elasticache.decr_misses
(count) | Memcached - The number of decrement requests the cache has received where the requested key was not found.
Shown as miss |
aws.elasticache.delete_hits
(count) | Memcached - The number of delete requests the cache has received where the requested key was found.
Shown as hit |
aws.elasticache.delete_misses
(count) | Memcached - The number of delete requests the cache has received where the requested key was not found.
Shown as miss |
aws.elasticache.engine_cpuutilization
(gauge) | The percentage of CPU utilization for the Redis process.
Shown as percent |
aws.elasticache.eval_based_cmds
(count) | Redis - The total number of commands for eval-based commands.
Shown as command |
aws.elasticache.eval_based_cmds_latency
(gauge) | Redis - The latency of eval-based commands.
Shown as microsecond |
aws.elasticache.evicted_unfetched
(count) | Memcached - The number of valid items evicted from the least recently used cache (LRU) which were never touched after being set.
Shown as item |
aws.elasticache.evictions
(count) | Redis - The number of keys that have been evicted due to the maxmemory limit. Memcached - The number of non-expired items the cache evicted to allow space for new writes.
Shown as eviction |
aws.elasticache.expired_unfetched
(count) | Memcached - The number of expired items reclaimed from the LRU which were never touched after being set.
Shown as item |
aws.elasticache.freeable_memory
(gauge) | The amount of free memory available on the host.
Shown as byte |
aws.elasticache.geo_spatial_based_cmds
(count) | Redis - The total number of geo spatial based commands.
Shown as command |
aws.elasticache.get_hits
(count) | Memcached - The number of get requests the cache has received where the key requested was found.
Shown as hit |
aws.elasticache.get_misses
(count) | Memcached - The number of get requests the cache has received where the key requested was not found.
Shown as miss |
aws.elasticache.get_type_cmds
(count) | Redis - The total number of get types of commands. This is derived from the Redis commandstats statistic by summing all of the get types of commands (get, mget, hget, etc.)
Shown as command |
aws.elasticache.get_type_cmds_latency
(gauge) | Redis - The latency of read commands.
Shown as microsecond |
aws.elasticache.hash_based_cmds
(count) | Redis - The total number of commands that are hash-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more hashes.
Shown as command |
aws.elasticache.hash_based_cmds_latency
(gauge) | Redis - The latency of hash-based commands.
Shown as microsecond |
aws.elasticache.hyper_log_log_based_cmds
(count) | Redis - The total number of HyperLogLog based commands. This is derived from the Redis commandstats statistic by summing all of the pf type of commands (pfadd, pfcount, pfmerge).
Shown as command |
aws.elasticache.incr_hits
(count) | Memcached - The number of increment requests the cache has received where the key requested was found.
Shown as hit |
aws.elasticache.incr_misses
(count) | Memcached - The number of increment requests the cache has received where the key requested was not found.
Shown as miss |
aws.elasticache.is_master
(gauge) | Redis - Returns 1 if the node is master, 0 otherwise. |
aws.elasticache.key_based_cmds
(count) | Redis - The total number of commands that are key-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more keys.
Shown as command |
aws.elasticache.key_based_cmds_latency
(gauge) | Redis - The latency of key-based commands.
Shown as microsecond |
aws.elasticache.list_based_cmds
(count) | Redis - The total number of commands that are list-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more lists.
Shown as command |
aws.elasticache.master_link_health_status
(gauge) | Redis - A value of 0 indicates that data in the Elasticache primary node is not in sync with Redis on EC2. A value of 1 indicates that the data is in sync. |
aws.elasticache.memory_fragmentation_ratio
(gauge) | Redis - Indicates the efficiency in the allocation of memory of the Redis engine. |
aws.elasticache.network_bytes_in
(count) | The number of bytes the host has read from the network.
Shown as byte |
aws.elasticache.network_bytes_out
(count) | The number of bytes the host has written to the network.
Shown as byte |
aws.elasticache.network_packets_in
(count) | The number of packets received on all network interfaces by the instance.
Shown as packet |
aws.elasticache.network_packets_out
(count) | The number of packets sent out on all network interfaces by the instance.
Shown as packet |
aws.elasticache.new_connections
(count) | Redis - The total number of connections that have been accepted by the server during this period. Memcached - The number of new connections the cache has received. This is derived from the memcached totalconnections statistic by recording the change in totalconnections across a period of time. This will always be at least 1, due to a connection reserved for a ElastiCache.
Shown as connection |
aws.elasticache.new_items
(count) | Memcached - The number of new items the cache has stored. This is derived from the memcached totalitems statistic by recording the change in totalitems across a period of time.
Shown as item |
aws.elasticache.node_count
(count) | The number of Elasticache nodes.
Shown as node |
aws.elasticache.reclaimed
(count) | Redis - The total number of key expiration events. Memcached - The number of expired items the cache evicted to allow space for new writes. |
aws.elasticache.replication_bytes
(gauge) | Redis - For primaries with attached replicas, ReplicationBytes reports the number of bytes that the primary is sending to all of its replicas. This metric is representative of the write load on the replication group. For replicas and standalone primaries, ReplicationBytes is always 0.
Shown as byte |
aws.elasticache.replication_lag
(gauge) | Redis - This metric is only applicable for a cache node running as a read replica. It represents how far behind, in seconds, the replica is in applying changes from the primary cache cluster.
Shown as second |
aws.elasticache.save_in_progress
(gauge) | Redis - This binary metric returns 1 whenever a background save (forked or forkless) is in progress, and 0 otherwise. A background save process is typically used during snapshots and syncs. These operations can cause degraded performance. Using the SaveInProgress metric, you can diagnose whether or not degraded performance was caused by a background save process. |
aws.elasticache.set_based_cmds
(count) | Redis - The total number of commands that are set-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more sets.
Shown as command |
aws.elasticache.set_based_cmds_latency
(gauge) | Redis - The latency of set-based commands.
Shown as microsecond |
aws.elasticache.set_type_cmds
(count) | Redis - The total number of set types of commands. This is derived from the Redis commandstats statistic by summing all of the set types of commands (set, hset, etc.)
Shown as command |
aws.elasticache.set_type_cmds_latency
(gauge) | Redis - The latency of write commands.
Shown as microsecond |
aws.elasticache.slabs_moved
(count) | Memcached - The total number of slab pages that have been moved.
Shown as page |
aws.elasticache.sorted_set_based_cmds
(count) | Redis - The total number of commands that are sorted set-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more sorted sets.
Shown as command |
aws.elasticache.sorted_set_based_cmds_latency
(gauge) | Redis - The latency of sorted-based commands.
Shown as microsecond |
aws.elasticache.stream_based_cmds
(count) | Redis - The total number of commands that are stream-based.
Shown as command |
aws.elasticache.stream_based_cmds_latency
(gauge) | Redis - The latency of stream-based commands.
Shown as microsecond |
aws.elasticache.string_based_cmds
(count) | Redis - The total number of commands that are string-based. This is derived from the Redis commandstats statistic by summing all of the commands that act upon one or more strings.
Shown as command |
aws.elasticache.string_based_cmds_latency
(gauge) | Redis - The latency of string-based commands.
Shown as microsecond |
aws.elasticache.swap_usage
(gauge) | The amount of swap used on the host.
Shown as byte |
aws.elasticache.touch_hits
(count) | Memcached - The number of keys that have been touched and were given a new expiration time.
Shown as hit |
aws.elasticache.touch_misses
(count) | Memcached - The number of items that have been touched, but were not found.
Shown as miss |
aws.elasticache.unused_memory
(gauge) | Memcached - The amount of unused memory the cache can use to store items. This is derived from the memcached statistics limitmaxbytes and bytes by subtracting bytes from limitmaxbytes.
Shown as byte |
