Basic Agent Usage for SUSE
Overview
This page outlines the basic features of the Datadog Agent for SUSE. If you haven’t installed the Agent yet, instructions can be found in the Datadog Agent Integration documentation.
Packages are available for 64-bit x86 architectures. For other architectures, use the source install.
Note: SUSE 11 SP4 and above are supported in Agent < 6.33.0/7.33.0. SLES 12 and above and OpenSUSE 15 and above are supported in Agent >= 6.33.0/7.33.0.
Commands
In Agent v6 and v7, the service manager provided by the operating system is responsible for the Agent lifecycle, while other commands must be run through the Agent binary directly. In Agent v5, almost everything is done through the service manager.
SUSE 12 and higher
| Description | Command |
|---|
| Start Agent as a service | sudo systemctl start datadog-agent |
| Stop Agent running as a service | sudo systemctl stop datadog-agent |
| Restart Agent running as a service | sudo systemctl restart datadog-agent |
| Status of Agent service | sudo systemctl status datadog-agent |
| Status page of running Agent | sudo datadog-agent status |
| Send flare | sudo datadog-agent flare |
| Display command usage | sudo datadog-agent --help |
| Run a check | sudo -u dd-agent -- datadog-agent check <CHECK_NAME> |
SUSE 11
| Description | Command |
|---|
| Start Agent as a service | sudo service datadog-agent start |
| Stop Agent running as a service | sudo service datadog-agent stop |
| Restart Agent running as a service | sudo service datadog-agent restart |
| Status of Agent service | sudo service datadog-agent status |
| Status page of running Agent | sudo datadog-agent status |
| Send flare | sudo datadog-agent flare |
| Display command usage | sudo datadog-agent --help |
| Run a check | sudo -u dd-agent -- datadog-agent check <CHECK_NAME> |
Note: If the service wrapper is not available on your system, use:
- On
upstart-based systems: sudo start/stop/restart/status datadog-agent - On
systemd-based systems: sudo systemctl start/stop/restart/status datadog-agent
Configuration
The configuration files and folders for the Agent are located in:
/etc/datadog-agent/datadog.yaml
Configuration files for Integrations:
/etc/datadog-agent/conf.d/
Uninstall the Agent
To uninstall the Agent, run the following command:
sudo zypper remove datadog-agent
This command removes the Agent, but does not remove:
- The
datadog.yaml configuration file - User-created files in the
/etc/datadog-agent configuration folder - User-created files in the
/opt/datadog-agent folder - The
dd-agent user - Datadog log files
If you also want to remove these elements, run this command after removing the Agent:
sudo userdel dd-agent \
&& sudo rm -rf /opt/datadog-agent/ \
&& sudo rm -rf /etc/datadog-agent/ \
&& sudo rm -rf /var/log/datadog/
Troubleshooting
See the Agent Troubleshooting documentation.
Working with the embedded Agent
The Agent contains an embedded Python environment at /opt/datadog-agent/embedded/. Common binaries such as python and pip are contained within /opt/datadog-agent/embedded/bin/.
See the instructions on how to add packages to the embedded Agent for more information.
Further Reading
Additional helpful documentation, links, and articles:
