system.net.aws.ec2.bw_in_allowance_exceeded
(gauge) | The number of packets shaped because the inbound aggregate bandwidth exceeded the maximum for the instance.
Shown as packet |
system.net.aws.ec2.bw_out_allowance_exceeded
(gauge) | The number of packets shaped because the outbound aggregate bandwidth exceeded the maximum for the instance.
Shown as packet |
system.net.aws.ec2.conntrack_allowance_available
(gauge) | The number of tracked connections that can be established before hitting the Connections Tracked allowance.
Shown as connection |
system.net.aws.ec2.conntrack_allowance_exceeded
(gauge) | The number of packets shaped because connection tracking exceeded the maximum for the instance and new connections could not be established.
Shown as packet |
system.net.aws.ec2.linklocal_allowance_exceeded
(gauge) | The number of packets shaped because the PPS of the traffic to local proxy services exceeded the maximum for the network interface.
Shown as packet |
system.net.aws.ec2.pps_allowance_exceeded
(gauge) | The number of packets shaped because the bidirectional PPS exceeded the maximum for the instance.
Shown as packet |
system.net.iface.mtu
(gauge) | The Maximum Transmission Unit (MTU) of the network interface (Linux only).
Shown as unit |
system.net.iface.tx_queue_len
(gauge) | The length of the transmit queue of the network interface (Linux only).
Shown as unit |
system.net.iface.num_tx_queues
(gauge) | The number of transmit queue of a network interface (Linux only).
Shown as unit |
system.net.iface.num_rx_queues
(gauge) | The number of receive queue of a network interface (Linux only).
Shown as unit |
system.net.bytes_rcvd
(gauge) | The number of bytes received on a device per second.
Shown as byte |
system.net.bytes_sent
(gauge) | The number of bytes sent from a device per second.
Shown as byte |
system.net.conntrack.acct
(gauge) | Boolean to enable connection tracking flow accounting. 64-bit byte and packet counters per flow are added.
Shown as unit |
system.net.conntrack.buckets
(gauge) | Size of the hash table.
Shown as unit |
system.net.conntrack.checksum
(gauge) | Boolean to verify checksum of incoming packets.
Shown as unit |
system.net.conntrack.count
(gauge) | The number of connections present in the conntrack table.
Shown as connection |
system.net.conntrack.drop
(count) | The number of drop in the conntrack table.
Shown as unit |
system.net.conntrack.early_drop
(count) | The number of early drop in the conntrack table.
Shown as unit |
system.net.conntrack.error
(count) | The number of error in the conntrack table.
Shown as unit |
system.net.conntrack.events
(count) | Boolean to enable the connection tracking code will provide userspace with connection tracking events via ctnetlink.
Shown as unit |
system.net.conntrack.events_retry_timeout
(gauge) |
Shown as unit |
system.net.conntrack.expect_max
(gauge) | Maximum size of expectation table.
Shown as unit |
system.net.conntrack.found
(count) | The number of currently allocated flow entries.
Shown as unit |
system.net.conntrack.generic_timeout
(gauge) | Default for generic timeout. This refers to layer 4 unknown/unsupported protocols.
Shown as unit |
system.net.conntrack.helper
(gauge) | Boolean to enable automatic conntrack helper assignment.
Shown as unit |
system.net.conntrack.icmp_timeout
(gauge) | Default for ICMP timeout.
Shown as second |
system.net.conntrack.ignore
(count) | The number of ignored in the conntrack table.
Shown as unit |
system.net.conntrack.invalid
(count) | The number of invalid in the conntrack table.
Shown as unit |
system.net.conntrack.insert
(count) | The number of insertion in the conntrack table.
Shown as unit |
system.net.conntrack.insert_failed
(count) | The number of failed insertion in the conntrack table.
Shown as unit |
system.net.conntrack.log_invalid
(gauge) | Log invalid packets of a type specified by value.
Shown as unit |
system.net.conntrack.max
(gauge) | Conntrack table max capacity.
Shown as connection |
system.net.conntrack.search_restart
(count) |
Shown as unit |
system.net.conntrack.tcp_be_liberal
(gauge) | Boolean to mark only out of window RST segments as INVALID.
Shown as unit |
system.net.conntrack.tcp_loose
(gauge) | Boolean to enable picking up already established connections.
Shown as unit |
system.net.conntrack.tcp_max_retrans
(gauge) | Maximum number of packets that can be retransmitted without received an (acceptable) ACK from the destination.
Shown as packet |
system.net.conntrack.tcp_timeout_close
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_close_wait
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_established
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_fin_wait
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_last_ack
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_max_retrans
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_syn_recv
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_syn_sent
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_time_wait
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_unacknowledged
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout
(gauge) |
Shown as second |
system.net.conntrack.tcp_timeout_stream
(gauge) |
Shown as second |
system.net.conntrack.timestamp
(gauge) | Boolean to enable connection tracking flow timestamping.
Shown as unit |
system.net.packets_in.count
(gauge) | The number of packets of data received by the interface.
Shown as packet |
system.net.packets_in.drop
(gauge) | The number of packet receive drops detected by the device driver. This metric is only available on Linux or Windows.
Shown as packet |
system.net.packets_in.error
(gauge) | The number of packet receive errors detected by the device driver.
Shown as error |
system.net.packets_out.count
(gauge) | The number of packets of data transmitted by the interface.
Shown as packet |
system.net.packets_out.drop
(gauge) | The number of packet transmit drops detected by the device driver. This metric is only available on Linux or Windows.
Shown as packet |
system.net.packets_out.error
(gauge) | The number of packet transmit errors detected by the device driver.
Shown as error |
system.net.ip.in_receives
(gauge) | Number of received IP datagrams (including dropped datagrams) (Linux only).
Shown as datagram |
system.net.ip.in_receives.count
(count) | Number of received IP datagrams (including dropped datagrams) (Linux only).
Shown as datagram |
system.net.ip.in_header_errors
(gauge) | Number of received IP datagrams discarded because of IP header errors (Linux only).
Shown as datagram |
system.net.ip.in_header_errors.count
(count) | Number of received IP datagrams discarded because of IP header errors (Linux only).
Shown as datagram |
system.net.ip.in_addr_errors
(gauge) | Number of received IP datagrams discarded because of an invalid IP address (Linux only).
Shown as datagram |
system.net.ip.in_addr_errors.count
(count) | Number of received IP datagrams discarded because of an invalid IP address (Linux only).
Shown as datagram |
system.net.ip.in_unknown_protos
(gauge) | Number of received IP datagrams discarded because of an unknown IP proto (Linux only).
Shown as datagram |
system.net.ip.in_unknown_protos.count
(count) | Number of received IP datagrams discarded because of an unknown IP proto (Linux only).
Shown as datagram |
system.net.ip.in_discards
(gauge) | Number of received IP datagrams which were valid but discarded due to buffer issue (Linux only).
Shown as datagram |
system.net.ip.in_discards.count
(count) | Number of received IP datagrams which were valid but discarded due to buffer issue (Linux only).
Shown as datagram |
system.net.ip.in_delivers
(gauge) | Number of received IP datagrams delivered to IP user-protocols (including ICMP) (Linux only).
Shown as datagram |
system.net.ip.in_delivers.count
(count) | Number of received IP datagrams delivered to IP user-protocols (including ICMP) (Linux only).
Shown as datagram |
system.net.ip.out_requests
(gauge) | Number of output IP datagrams (Linux only).
Shown as datagram |
system.net.ip.out_requests.count
(count) | Number of output IP datagrams (Linux only).
Shown as datagram |
system.net.ip.out_discards
(gauge) | Number of output IP datagrams which were valid but discarded due to buffer issue (Linux only).
Shown as datagram |
system.net.ip.out_discards.count
(count) | Number of output IP datagrams which were valid but discarded due to buffer issue (Linux only).
Shown as datagram |
system.net.ip.out_no_routes
(gauge) | Number of output IP datagrams discarded because no route was found (Linux only).
Shown as datagram |
system.net.ip.out_no_routes.count
(count) | Number of output IP datagrams discarded because no route was found (Linux only).
Shown as datagram |
system.net.ip.forwarded_datagrams
(gauge) | Number of IP datagrams forwarded (Linux only).
Shown as datagram |
system.net.ip.forwarded_datagrams.count
(count) | Number of IP datagrams forwarded (Linux only).
Shown as datagram |
system.net.ip.reassembly_timeouts
(gauge) | Number of IP timeouts triggered during reassembly (Linux only).
Shown as timeout |
system.net.ip.reassembly_timeouts.count
(count) | Number of IP timeouts triggered during reassembly (Linux only).
Shown as timeout |
system.net.ip.reassembly_requests
(gauge) | Number of IP fragments received that needed to be reassembled (Linux only). |
system.net.ip.reassembly_requests.count
(count) | Number of IP fragments received that needed to be reassembled (Linux only). |
system.net.ip.reassembly_oks
(gauge) | Number of IP datagrams successfully reassembled (Linux only).
Shown as datagram |
system.net.ip.reassembly_oks.count
(count) | Number of IP datagrams successfully reassembled (Linux only).
Shown as datagram |
system.net.ip.reassembly_fails
(gauge) | Number of failures during IP reassembly (Linux only). |
system.net.ip.reassembly_fails.count
(count) | Number of failures during IP reassembly (Linux only). |
system.net.ip.reassembly_overlaps
(gauge) | Number of input IP fragments overlapping during reassembly (Linux only).
Shown as datagram |
system.net.ip.reassembly_overlaps.count
(count) | Number of input IP fragments overlapping during reassembly (Linux only).
Shown as datagram |
system.net.ip.fragmentation_oks
(gauge) | Number of output IP datagrams that were successfully fragmented (Linux only).
Shown as datagram |
system.net.ip.fragmentation_oks.count
(count) | Number of output IP datagrams that were successfully fragmented (Linux only).
Shown as datagram |
system.net.ip.fragmentation_fails
(gauge) | Number of output IP datagrams discarded because they couldn't be fragmented (Linux only).
Shown as datagram |
system.net.ip.fragmentation_fails.count
(count) | Number of output IP datagrams discarded because they couldn't be fragmented (Linux only).
Shown as datagram |
system.net.ip.fragmentation_creates
(gauge) | Number of output IP fragments generated as a result of IP fragmentation (Linux only). |
system.net.ip.fragmentation_creates.count
(count) | Number of output IP fragments generated as a result of IP fragmentation (Linux only). |
system.net.ip.in_no_routes
(gauge) | Number of input IP datagrams discarded because no route was found (Linux only).
Shown as datagram |
system.net.ip.in_no_routes.count
(count) | Number of input IP datagrams discarded because no route was found (Linux only).
Shown as datagram |
system.net.ip.in_truncated_pkts
(gauge) | Number of input IP datagrams whose actual size is smaller than the Total Length field in the IPv4 header (Linux only).
Shown as datagram |
system.net.ip.in_truncated_pkts.count
(count) | Number of input IP datagrams whose actual size is smaller than the Total Length field in the IPv4 header (Linux only).
Shown as datagram |
system.net.ip.in_csum_errors
(gauge) | Number of input IP datagrams with incorrect checksum (Linux only).
Shown as datagram |
system.net.ip.in_csum_errors.count
(count) | Number of input IP datagrams with incorrect checksum (Linux only).
Shown as datagram |
system.net.tcp.active_opens
(gauge) | Number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state (Linux or Windows only).
Shown as connection |
system.net.tcp.active_opens.count
(count) | Number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state (Linux or Windows only).
Shown as connection |
system.net.tcp.passive_opens
(gauge) | Number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Linux or Windows only).
Shown as connection |
system.net.tcp.passive_opens.count
(count) | Number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Linux or Windows only).
Shown as connection |
system.net.tcp.attempt_fails
(gauge) | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Linux or Windows only).
Shown as connection |
system.net.tcp.attempt_fails.count
(count) | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Linux or Windows only).
Shown as connection |
system.net.tcp.established_resets
(gauge) | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Linux or Windows only).
Shown as connection |
system.net.tcp.established_resets.count
(count) | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Linux or Windows only).
Shown as connection |
system.net.tcp.current_established
(gauge) | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT (Linux or Windows only).
Shown as connection |
system.net.tcp.current_established.count
(count) | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT (Linux or Windows only).
Shown as connection |
system.net.tcp.connections
(gauge) | The number of TCP connections in all states except listening connections.
Shown as segment |
system.net.tcp.connections.count
(count) | Total count of TCP connections in all states except listening connections.
Shown as segment |
system.net.tcp.in_errors
(gauge) | The total number of segments received in error (e.g. bad TCP checksums) (Linux or Windows only).
Shown as packet |
system.net.tcp.in_errors.count
(count) | The total number of segments received in error (e.g. bad TCP checksums) (Linux or Windows only).
Shown as packet |
system.net.tcp.out_resets
(gauge) | The number of TCP segments sent containing the RST flag (Linux or Windows only).
Shown as packet |
system.net.tcp.out_resets.count
(count) | The number of TCP segments sent containing the RST flag (Linux or Windows only).
Shown as packet |
system.net.tcp.in_csum_errors
(gauge) | The number of TCP segments received with a bad TCP checksum (Linux only).
Shown as packet |
system.net.tcp.in_csum_errors.count
(count) | The number of TCP segments received with a bad TCP checksum (Linux only).
Shown as packet |
system.net.tcp.failed_retransmits
(gauge) | Number of TCP packets that failed to be retransmitted (Linux only)
Shown as packet |
system.net.tcp.failed_retransmits.count
(count) | Number of TCP packets that failed to be retransmitted (Linux only)
Shown as packet |
system.net.tcp.in_segs
(gauge) | The number of TCP segments received (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.in_segs.count
(count) | Total number of received TCP segments (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.out_segs
(gauge) | The number of TCP segments transmitted (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.out_segs.count
(count) | Total number of transmitted TCP segments (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.rcv_packs
(gauge) | The number of TCP packets received (BSD only).
Shown as packet |
system.net.tcp.retrans_packs
(gauge) | The number of TCP packets retransmitted (BSD only).
Shown as packet |
system.net.tcp.retrans_segs
(gauge) | The number of TCP segments retransmitted (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.retrans_segs.count
(count) | Total number of retransmitted TCP segments (Linux, Solaris, or Windows only).
Shown as segment |
system.net.tcp.sent_packs
(gauge) | The number of TCP packets transmitted (BSD only).
Shown as packet |
system.net.tcp.listen_overflows
(gauge) | The number of times connections have overflowed the accept buffer (Linux only). Available since Agent v5.14.0. |
system.net.tcp.listen_overflows.count
(count) | Total number of times connections have overflowed the accept buffer (Linux only). |
system.net.tcp.listen_drops
(gauge) | The number of times connections have dropped out of listen (Linux only). Available since Agent v5.14.0. |
system.net.tcp.listen_drops.count
(count) | Total number of times connections have dropped out of listen (Linux only). |
system.net.tcp.backlog_drops
(gauge) | The number of packets dropped because there wasn't room in the TCP backlog (Linux only). Available since Agent v5.14.0.
Shown as packet |
system.net.tcp.backlog_drops.count
(count) | Total number of packets dropped because there wasn't room in the TCP backlog (Linux only).
Shown as packet |
system.net.tcp.prune_called
(gauge) | The number of times TCP prune was called (Linux only). |
system.net.tcp.prune_called.count
(count) | Total number of times TCP prune was called (Linux only). |
system.net.tcp.prune_rcv_drops
(gauge) | The number of received packets dropped after an unsuccessful prune (Linux only).
Shown as packet |
system.net.tcp.prune_rcv_drops.count
(count) | Total number of received packets dropped after an unsuccessful prune (Linux only).
Shown as packet |
system.net.tcp.prune_ofo_called
(gauge) | The number of times the out-of-order queues were pruned (Linux only). |
system.net.tcp.prune_ofo_called.count
(count) | Total number of times the out-of-order queues were pruned (Linux only). |
system.net.tcp.paws_connection_drops
(gauge) | The number of SYN-ACK packets dropped by PAWS (Linux only).
Shown as packet |
system.net.tcp.paws_connection_drops.count
(count) | Total number of SYN-ACK packets dropped by PAWS (Linux only). |
system.net.tcp.paws_established_drops
(gauge) | The number of packets dropped by PAWS in an established connection (Linux only).
Shown as packet |
system.net.tcp.paws_established_drops.count
(count) | Total number of packets dropped by PAWS in an established connection (Linux only). |
system.net.tcp.syn_cookies_sent
(gauge) | The number of SYN cookie packets sent (Linux only).
Shown as packet |
system.net.tcp.syn_cookies_sent.count
(count) | Total number of SYN cookie packets sent (Linux only). |
system.net.tcp.syn_cookies_recv
(gauge) | The number of SYN cookie packets received (Linux only).
Shown as packet |
system.net.tcp.syn_cookies_recv.count
(count) | Total number of SYN cookie packets received (Linux only). |
system.net.tcp.syn_cookies_failed
(gauge) | The number of failed SYN cookie packets received (Linux only).
Shown as packet |
system.net.tcp.syn_cookies_failed.count
(count) | Total number of failed SYN cookie packets received (Linux only). |
system.net.tcp.abort_on_timeout
(gauge) | The number of sockets closed due to timeout (maximum retransmission reached or tcp keepalive timeout) (Linux only). |
system.net.tcp.abort_on_timeout.count
(count) | Total number of sockets closed due to timeout (maximum retransmission reached or tcp keepalive timeout) (Linux only). |
system.net.tcp.syn_retrans
(gauge) | The number of SYN packets retransmitted (Linux only).
Shown as packet |
system.net.tcp.syn_retrans.count
(count) | Total number of SYN packets retransmitted (Linux only). |
system.net.tcp.from_zero_window
(gauge) | The number of sockets exiting a zero window state (Linux only). |
system.net.tcp.from_zero_window.count
(count) | Total number of sockets exiting a zero window state (Linux only). |
system.net.tcp.to_zero_window
(gauge) | The number of sockets entering a zero window state (Linux only). |
system.net.tcp.to_zero_window.count
(count) | Total number of sockets entering a zero window state (Linux only). |
system.net.tcp.tw_reused
(gauge) | The number of time wait sockets reused (Linux only). |
system.net.tcp.tw_reused.count
(count) | Total number of time wait sockets reused (Linux only). |
system.net.ip.reverse_path_filter
(gauge) | The number of martian packets dropped by the reverse path filter (Linux only).
Shown as packet |
system.net.ip.reverse_path_filter.count
(count) | Total number of martian packets dropped by the reverse path filter (Linux only).
Shown as packet |
system.net.tcp.recv_q.95percentile
(gauge) | The 95th percentile of the size of the TCP receive queue.
Shown as byte |
system.net.tcp.recv_q.avg
(gauge) | The average TCP receive queue size.
Shown as byte |
system.net.tcp.recv_q.count
(rate) | The rate of connections.
Shown as connection |
system.net.tcp.recv_q.max
(gauge) | The maximum TCP receive queue size.
Shown as byte |
system.net.tcp.recv_q.median
(gauge) | The median TCP receive queue size.
Shown as byte |
system.net.tcp.send_q.95percentile
(gauge) | The 95th percentile of the size of the TCP send queue.
Shown as byte |
system.net.tcp.send_q.avg
(gauge) | The average TCP send queue size.
Shown as byte |
system.net.tcp.send_q.count
(rate) | The rate of connections.
Shown as connection |
system.net.tcp.send_q.max
(gauge) | The maximum TCP send queue size.
Shown as byte |
system.net.tcp.send_q.median
(gauge) | The median TCP send queue size.
Shown as byte |
system.net.tcp4.close
(gauge) | The number of closed TCP IPv4 connections.
Shown as connection |
system.net.tcp4.close_wait
(gauge) | The number of TCP IPv4 connections waiting for termination.
Shown as connection |
system.net.tcp4.closing
(gauge) | The number of TCP IPv4 closing connections.
Shown as connection |
system.net.tcp4.estab
(gauge) | The number of open TCP IPv4 connections.
Shown as connection |
system.net.tcp4.established
(gauge) | The number of TCP IPv4 established connections.
Shown as connection |
system.net.tcp4.fin_wait_1
(gauge) | The number of TCP IPv4 connections waiting for a connection termination request or an ack of a connection termination request sent previously.
Shown as connection |
system.net.tcp4.fin_wait_2
(gauge) | The number of TCP IPv4 connections waiting for a connection termination request.
Shown as connection |
system.net.tcp4.listen
(gauge) | The number of TCP IPv4 listening connections.
Shown as connection |
system.net.tcp4.listening
(gauge) | The number of TCP IPv4 listening connections.
Shown as connection |
system.net.tcp4.opening
(gauge) | The number of TCP IPv4 opening connections.
Shown as connection |
system.net.tcp4.syn_recv
(gauge) | The number of TCP IPv4 connections waiting for confirming connection request.
Shown as connection |
system.net.tcp4.syn_sent
(gauge) | The number of TCP IPv4 connections waiting for matching connection request.
Shown as connection |
system.net.tcp4.time_wait
(gauge) | The number of TCP IPv4 closed connections waiting for delayed packets.
Shown as connection |
system.net.tcp4.unconn
(gauge) | The number of TCP IPv4 connections in unconnected state.
Shown as connection |
system.net.tcp4.active_opens
(gauge) | Number of times TCP IPv4 connections have made a direct transition to the SYN-SENT state from the CLOSED state (Windows only).
Shown as connection |
system.net.tcp4.active_opens.count
(count) | Number of times TCP IPv4 connections have made a direct transition to the SYN-SENT state from the CLOSED state (Windows only).
Shown as connection |
system.net.tcp4.connections
(gauge) | The number of TCP IPv4 connections connections in all states except listening connections (Windows only).
Shown as segment |
system.net.tcp4.connections.count
(count) | Total count of TCP IPv4 connections connections in all states except listening connections (Windows only).
Shown as segment |
system.net.tcp4.passive_opens
(gauge) | Number of times TCP IPv4 connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Windows only).
Shown as connection |
system.net.tcp4.passive_opens.count
(count) | Number of times TCP IPv4 connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Windows only).
Shown as connection |
system.net.tcp4.attempt_fails
(gauge) | The number of times TCP IPv4 connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP IPv4 connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Windows only).
Shown as connection |
system.net.tcp4.attempt_fails.count
(count) | The number of times TCP IPv4 connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP IPv4 connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Windows only).
Shown as connection |
system.net.tcp4.established_resets
(gauge) | The number of times TCP IPv4 connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Windows only).
Shown as connection |
system.net.tcp4.established_resets.count
(count) | The number of times TCP IPv4 connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Windows only).
Shown as connection |
system.net.tcp4.current_established
(gauge) | The number of currently established TCP IPv4 connections (Windows only).
Shown as segment |
system.net.tcp4.current_established.count
(count) | The number of currently established TCP IPv4 connections (Windows only).
Shown as segment |
system.net.tcp4.in_errors
(gauge) | The total number of segments received in error (e.g. bad TCP IPv4 checksums) (Windows only).
Shown as packet |
system.net.tcp4.in_errors.count
(count) | The total number of segments received in error (e.g. bad TCP IPv4 checksums) (Windows only).
Shown as packet |
system.net.tcp4.out_resets
(gauge) | The number of TCP IPv4 segments sent containing the RST flag (Windows only).
Shown as packet |
system.net.tcp4.out_resets.count
(count) | The number of TCP IPv4 segments sent containing the RST flag (Windows only).
Shown as packet |
system.net.tcp4.in_segs
(gauge) | The number of TCP IPv4 segments received (Windows only).
Shown as segment |
system.net.tcp4.in_segs.count
(count) | Total number of received TCP IPv4 segments (Windows only).
Shown as segment |
system.net.tcp4.out_segs
(gauge) | The number of TCP IPv4 segments transmitted (Windows only).
Shown as segment |
system.net.tcp4.out_segs.count
(count) | Total number of transmitted TCP IPv4 segments (Windows only).
Shown as segment |
system.net.tcp4.retrans_segs
(gauge) | The number of TCP IPv4 segments retransmitted (Windows only).
Shown as segment |
system.net.tcp4.retrans_segs.count
(count) | Total number of retransmitted TCP IPv4 segments (Windows only).
Shown as segment |
system.net.tcp6.close
(gauge) | The number of closed TCP IPv6 connections.
Shown as connection |
system.net.tcp6.close_wait
(gauge) | The number of TCP IPv6 connections waiting for termination.
Shown as connection |
system.net.tcp6.closing
(gauge) | The number of TCP IPv6 closing connections.
Shown as connection |
system.net.tcp6.estab
(gauge) | The number of open TCP IPv6 connections.
Shown as connection |
system.net.tcp6.established
(gauge) | The number of TCP IPv6 established connections.
Shown as connection |
system.net.tcp6.fin_wait_1
(gauge) | The number of TCP IPv6 connections waiting for a connection termination request or an ack of a connection termination request sent previously.
Shown as connection |
system.net.tcp6.fin_wait_2
(gauge) | The number of TCP IPv6 connections waiting for a connection termination request.
Shown as connection |
system.net.tcp6.listen
(gauge) | The number of TCP IPv6 listening connections.
Shown as connection |
system.net.tcp6.listening
(gauge) | The number of TCP IPv6 listening connections.
Shown as connection |
system.net.tcp6.opening
(gauge) | The number of TCP IPv6 opening connections.
Shown as connection |
system.net.tcp6.syn_recv
(gauge) | The number of TCP IPv6 connections waiting for confirming connection request.
Shown as connection |
system.net.tcp6.syn_sent
(gauge) | The number of TCP IPv6 connections waiting for matching connection request.
Shown as connection |
system.net.tcp6.time_wait
(gauge) | The number of TCP IPv6 closed connections waiting for delayed packets.
Shown as connection |
system.net.tcp6.unconn
(gauge) | The number of TCP IPv6 connections in unconnected state.
Shown as connection |
system.net.tcp6.active_opens
(gauge) | Number of times TCP IPv6 connections have made a direct transition to the SYN-SENT state from the CLOSED state (Windows only).
Shown as connection |
system.net.tcp6.active_opens.count
(count) | Number of times TCP IPv6 connections have made a direct transition to the SYN-SENT state from the CLOSED state (Windows only).
Shown as connection |
system.net.tcp6.connections
(gauge) | The number of TCP IPv6 connections connections in all states except listening connections (Windows only).
Shown as segment |
system.net.tcp6.connections.count
(count) | Total count of TCP IPv6 connections connections in all states except listening connections (Windows only).
Shown as segment |
system.net.tcp6.passive_opens
(gauge) | Number of times TCP IPv6 connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Windows only).
Shown as connection |
system.net.tcp6.passive_opens.count
(count) | Number of times TCP IPv6 connections have made a direct transition to the SYN-RCVD state from the LISTEN state (Windows only).
Shown as connection |
system.net.tcp6.attempt_fails
(gauge) | The number of times TCP IPv6 connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP IPv6 connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Windows only).
Shown as connection |
system.net.tcp6.attempt_fails.count
(count) | The number of times TCP IPv6 connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state plus the number of times TCP IPv6 connections have made a direct transition to the LISTEN state from the SYN-RCVD state (Windows only).
Shown as connection |
system.net.tcp6.established_resets
(gauge) | The number of times TCP IPv6 connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Windows only).
Shown as connection |
system.net.tcp6.established_resets.count
(count) | The number of times TCP IPv6 connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state (Windows only).
Shown as connection |
system.net.tcp6.current_established
(gauge) | The number of currently established TCP IPv6 connections (Windows only).
Shown as segment |
system.net.tcp6.current_established.count
(count) | The number of currently established TCP IPv6 connections (Windows only).
Shown as segment |
system.net.tcp6.in_errors
(gauge) | The total number of segments received in error (e.g. bad TCP IPv6 checksums) (Windows only).
Shown as packet |
system.net.tcp6.in_errors.count
(count) | The total number of segments received in error (e.g. bad TCP IPv6 checksums) (Windows only).
Shown as packet |
system.net.tcp6.out_resets
(gauge) | The number of TCP IPv6 segments sent containing the RST flag (Windows only).
Shown as packet |
system.net.tcp6.out_resets.count
(count) | The number of TCP IPv6 segments sent containing the RST flag (Windows only).
Shown as packet |
system.net.tcp6.in_segs
(gauge) | The number of TCP IPv6 segments received (Windows only).
Shown as segment |
system.net.tcp6.in_segs.count
(count) | Total number of received TCP IPv6 segments (Windows only).
Shown as segment |
system.net.tcp6.out_segs
(gauge) | The number of TCP IPv6 segments transmitted (Windows only).
Shown as segment |
system.net.tcp6.out_segs.count
(count) | Total number of transmitted TCP IPv6 segments (Windows only).
Shown as segment |
system.net.tcp6.retrans_segs
(gauge) | The number of TCP IPv6 segments retransmitted (Windows only).
Shown as segment |
system.net.tcp6.retrans_segs.count
(count) | Total number of retransmitted TCP IPv6 segments (Windows only).
Shown as segment |
system.net.udp.in_datagrams
(gauge) | The rate of UDP datagrams delivered to UDP users (Linux only).
Shown as datagram |
system.net.udp.in_datagrams.count
(count) | Total number of UDP datagrams delivered to UDP users (Linux only).
Shown as datagram |
system.net.udp.in_errors
(gauge) | The rate of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port (Linux only).
Shown as datagram |
system.net.udp.in_errors.count
(count) | Total number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port (Linux only).
Shown as datagram |
system.net.udp.no_ports
(gauge) | The rate of received UDP datagrams for which there was no application at the destination port (Linux only).
Shown as datagram |
system.net.udp.no_ports.count
(count) | Total number of received UDP datagrams for which there was no application at the destination port (Linux only).
Shown as datagram |
system.net.udp.out_datagrams
(gauge) | The rate of UDP datagrams sent from this entity (Linux only).
Shown as datagram |
system.net.udp.out_datagrams.count
(count) | Total number of UDP datagrams sent from this entity (Linux only).
Shown as datagram |
system.net.udp.rcv_buf_errors
(gauge) | The rate of UDP datagrams lost because there was no room in the receive buffer (Linux only).
Shown as error |
system.net.udp.rcv_buf_errors.count
(count) | Total number of UDP datagrams lost because there was no room in the receive buffer (Linux only).
Shown as error |
system.net.udp.snd_buf_errors
(gauge) | The rate of UDP datagrams lost because there was no room in the send buffer (Linux only).
Shown as error |
system.net.udp.snd_buf_errors.count
(count) | Total number of UDP datagrams lost because there was no room in the send buffer (Linux only).
Shown as error |
system.net.udp.in_csum_errors
(gauge) | The rate of UDP datagrams that failed checksum verification (Linux only).
Shown as error |
system.net.udp.in_csum_errors.count
(count) | Total number of UDP datagrams that failed checksum verification (Linux only).
Shown as error |
system.net.udp4.connections
(gauge) | The number of UDP IPv4 sockets currently opened.
Shown as connection |
system.net.udp6.connections
(gauge) | The number of UDP IPv6 sockets currently opened.
Shown as connection |
system.net.ena.queue.rx_cnt
(count) | The number of packets received by a queue (Linux only).
Shown as packet |
system.net.ena.queue.rx_bytes
(count) | The number of bytes received by a queue (Linux only).
Shown as byte |
system.net.ena.queue.rx_bad_csum
(count) | The number of packets received by a queue with an incorrect checksum (Linux only).
Shown as packet |
system.net.ena.queue.rx_good_csum
(count) | The number of packets received by a queue with an correct checksum (Linux only).
Shown as packet |
system.net.ena.queue.rx_csum_good
(count) | The number packets received by a queue with a good checksum (Linux only).
Shown as packet |
system.net.ena.queue.rx_csum_unchecked
(count) | The number packets received by a queue with an unchecked checksum (Linux only).
Shown as packet |
system.net.ena.queue.rx_rx_copybreak_pkt
(count) | The number of packets received by a queue copied to the skb header due to being smaller than the copybreak threshold (Linux only).
Shown as packet |
system.net.ena.queue.rx_refil_partial
(count) | The number of times a queue had partially allocated rx buffers (Linux only).
Shown as time |
system.net.ena.queue.rx_page_alloc_fail
(count) | The number of page allocation failures (Linux only).
Shown as error |
system.net.ena.queue.rx_skb_alloc_fail
(count) | The number of socket buffer allocation failures (Linux only).
Shown as error |
system.net.ena.queue.rx_dma_mapping_err
(count) | The number of dma mapping errors for a rx queue (Linux only).
Shown as error |
system.net.ena.queue.rx_bad_desc_num
(count) | The number of times received too many descriptors (Linux only).
Shown as time |
system.net.ena.queue.rx_bad_req_id
(count) | The number of times a request id was invalid on a receive queue (Linux only).
Shown as time |
system.net.ena.queue.rx_empty_rx_ring
(count) | The number time the rx ring was empty for a queue (Linux only).
Shown as time |
system.net.ena.queue.rx_xdp_aborted
(count) | The number XPD packets tagged as XDP_ABORTED (Linux only).
Shown as packet |
system.net.ena.queue.rx_xdp_drop
(count) | The number of XDP packets tagged as XDP_DROP (Linux only).
Shown as packet |
system.net.ena.queue.rx_xdp_pass
(count) | The number of XDP packets tagged as XDP_PASS (Linux only).
Shown as packet |
system.net.ena.queue.rx_xdp_tx
(count) | The number of XDP packets tagged as XDP_TX (Linux only).
Shown as packet |
system.net.ena.queue.rx_xdp_invalid
(count) | The number of XDP packets tagged as XDP_INVALID (Linux only).
Shown as packet |
system.net.ena.queue.rx_xdp_redirect
(count) | The number of XDP packets tagged as XDP_REDIRECT (Linux only).
Shown as packet |
system.net.ena.queue.tx_cnt
(count) | The number of packets sent by a queue (Linux only).
Shown as packet |
system.net.ena.queue.tx_bytes
(count) | The number of bytes sent by a queue (Linux only).
Shown as byte |
system.net.ena.queue.tx_dma_mapping_err
(count) | The number of dma mapping errors for a tx queue (Linux only).
Shown as error |
system.net.ena.queue.tx_bad_req_id
(count) | The number of times a request id was invalid on a transmit queue (Linux only).
Shown as time |
system.net.ena.queue.tx_queue_stop
(count) | The number of times a transmit queue was full and stopped (Linux only).
Shown as time |
system.net.ena.queue.tx_queue_wakeup
(count) | The number of times a transmit queue was resumed after being stopped (Linux only).
Shown as time |
system.net.ena.queue.tx_linearize
(count) | The number of times skb was linearized on a transmit queue (Linux only).
Shown as time |
system.net.ena.queue.tx_linearize_failed
(count) | The number of skb linearization failed on a transmit queue (Linux only).
Shown as time |
system.net.ena.queue.tx_doorbells
(count) | The number of submission queue doorbells written on a transmit queue (Linux only).
Shown as event |
system.net.ena.queue.tx_prepare_ctx_err
(count) | The number of times prepare tx failed on a transmit queue (Linux only).
Shown as error |
system.net.ena.queue.tx_llq_buffer_copy
(count) | The number of times a skb header was copied with Low Latency Queue (Linux only).
Shown as time |
system.net.ena.queue.tx_missed_tx
(count) | The number of packets that timeouted in the transmit queue (Linux only).
Shown as packet |
system.net.ena.queue.tx_unmask_interrupt
(count) | The number of times interrupt was unmasked in a transmit queue (Linux only).
Shown as time |
system.net.ena.queue.tx_napi_comp
(count) | The number of times napi_complete was called on a queue
Shown as time |
system.net.ena.queue.tx_tx_poll
(count) | The number of times the napi handler was scheduled for a queue (Linux only).
Shown as time |
system.net.ena.tx_timeout
(count) | The number of transmit timeouts (Linux only).
Shown as timeout |
system.net.ena.suspend
(count) | The number of times the device was suspended (Linux only).
Shown as time |
system.net.ena.resume
(count) | The number of times the device was resumed (Linux only).
Shown as time |
system.net.ena.wd_expired
(count) | The number of times watchdog keep-alive event expired (Linux only).
Shown as time |
system.net.virtio_net.queue.rx_drops
(count) | The number of packets dropped on a receive queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.rx_kicks
(count) | The number of kicks sent to the hypervisor for a receive queue (Linux only).
Shown as event |
system.net.virtio_net.queue.rx_packets
(count) | The number of packets received by a queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.rx_bytes
(count) | The number of bytes received by a queue (Linux only).
Shown as byte |
system.net.virtio_net.queue.rx_xdp_drops
(count) | The number of XDP packets tagged as XDP_DROP in a receive queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.rx_xdp_redirects
(count) | The number of XDP packets tagged as XDP_REDIRECT in a receive queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.rx_xdp_tx
(count) | The number of XDP packets tagged as XDP_TX in a receive queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.tx_kicks
(count) | The number of kicks sent to the hypervisor for a transmit queue (Linux only).
Shown as event |
system.net.virtio_net.queue.tx_packets
(count) | The number of packets sent by a transmit queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.tx_bytes
(count) | The number of bytes sent by a transmit queue (Linux only).
Shown as byte |
system.net.virtio_net.queue.tx_xdp_tx
(count) | The number of XDP packets tagged as XDP_TX in a transmit queue (Linux only).
Shown as packet |
system.net.virtio_net.queue.tx_xdp_tx_drops
(count) | The number of XDP packets tagged as XDP_DROP in a transmit queue (Linux only).
Shown as packet |
system.net.hv_netvsc.queue.rx_bytes
(count) | The number of bytes received by a queue (Linux only).
Shown as byte |
system.net.hv_netvsc.queue.rx_packets
(count) | The number of packets received by a queue (Linux only).
Shown as packet |
system.net.hv_netvsc.queue.rx_xdp_drop
(count) | The number of XDP packets tagged as XDP_DROP in a receive queue (Linux only).
Shown as packet |
system.net.hv_netvsc.queue.tx_bytes
(count) | The number of bytes sent by a queue (Linux only).
Shown as packet |
system.net.hv_netvsc.queue.tx_packets
(count) | The number of packets sent by a queue (Linux only).
Shown as packet |
system.net.hv_netvsc.cpu.rx_packets
(count) | The number of received packets processed by a cpu (Linux only).
Shown as packet |
system.net.hv_netvsc.cpu.vf_rx_packets
(count) | The number of received packets processed by a cpu using virtual function (Linux only).
Shown as packet |
system.net.hv_netvsc.cpu.rx_bytes
(count) | The number of received bytes processed by a cpu (Linux only).
Shown as byte |
system.net.hv_netvsc.cpu.vf_rx_bytes
(count) | The number of received packets processed by a cpu using virtual function (Linux only).
Shown as byte |
system.net.hv_netvsc.cpu.tx_packets
(count) | The number of sent packets processed by a cpu (Linux only).
Shown as packet |
system.net.hv_netvsc.cpu.vf_tx_packets
(count) | The number of sent packets processed by a cpu using virtual function (Linux only).
Shown as packet |
system.net.hv_netvsc.cpu.tx_bytes
(count) | The number of sent bytes processed by a cpu (Linux only).
Shown as byte |
system.net.hv_netvsc.cpu.vf_tx_bytes
(count) | The number of sent packets processed by a cpu using virtual function (Linux only).
Shown as byte |
system.net.hv_netvsc.tx_scattered
(count) | The number of transmits exceeding the max page count. This will trigger a socket buffer linearization to try to reduce the number of necessary pages (Linux only).
Shown as packet |
system.net.hv_netvsc.tx_no_memory
(count) | The number of failed transmit due to allocation error (Linux only).
Shown as packet |
system.net.hv_netvsc.tx_no_space
(count) | The number of failed transmit due to a full ring buffer (Linux only).
Shown as packet |
system.net.hv_netvsc.tx_too_big
(count) | The number of dropped transmits due to exceeding the max page count even after socket buffer linearization (Linux only).
Shown as packet |
system.net.hv_netvsc.tx_busy
(count) | The number of failed transmits due to busy queue (Linux only).
Shown as packet |
system.net.hv_netvsc.tx_send_full
(count) | The number of time a send buffer was full (Linux only).
Shown as error |
system.net.hv_netvsc.rx_comp_busy
(count) | The number of completion requests that failed (Linux only).
Shown as error |
system.net.hv_netvsc.rx_no_memory
(count) | The number of failed receive due to allocation error (Linux only).
Shown as error |
system.net.hv_netvsc.stop_queue
(count) | The number of times a queue was stopped (Linux only).
Shown as time |
system.net.hv_netvsc.wake_queue
(count) | The number of times a queue was woken up (Linux only).
Shown as time |
system.net.gve.queue.rx_posted_desc
(count) | The number of descriptors posted on a receive queue (Linux only).
Shown as time |
system.net.gve.queue.rx_completed_desc
(count) | The number of descriptors completed on a receive queue (Linux only).
Shown as time |
system.net.gve.queue.rx_bytes
(count) | The number of bytes sent by a receveive queue (Linux only).
Shown as byte |
system.net.gve.queue.rx_dropped_pkt
(count) | The number of packets dropped because of descriptor errors (Linux only).
Shown as packet |
system.net.gve.queue.rx_copybreak_pkt
(count) | The number of packets copied to the socket buffer header because they are smaller than the copybreak threshold (Linux only).
Shown as packet |
system.net.gve.queue.rx_copied_pkt
(count) | The number of packets copied (Linux only).
Shown as packet |
system.net.gve.queue.rx_queue_drop_cnt
(count) | The number of packets dropped. Stats from NIC (Linux only).
Shown as packet |
system.net.gve.queue.rx_no_buffers_posted
(count) | The number of times there's no available buffer for posting descriptor. Stats from NIC (Linux only).
Shown as time |
system.net.gve.queue.rx_drops_packet_over_mru
(count) | The number of packets dropped because it exceeds the Maximum Receive Unit. Stats from NIC (Linux only).
Shown as packet |
system.net.gve.queue.rx_drops_invalid_checksum
(count) | The number of packets dropped because due to invalid checksum. Stats from NIC (Linux only).
Shown as packet |
system.net.gve.queue.tx_posted_desc
(count) | The number of descriptors posted on a transmit queue (Linux only).
Shown as time |
system.net.gve.queue.tx_completed_desc
(count) | The number of descriptors completed on a transmit queue (Linux only).
Shown as time |
system.net.gve.queue.tx_bytes
(count) | The number of bytes sent by a transmit queue (Linux only).
Shown as byte |
system.net.gve.queue.tx_wake
(count) | The number of time the transmit queue was woken up (Linux only).
Shown as time |
system.net.gve.queue.tx_stop
(count) | The number of time the transmit queue was stopped (Linux only).
Shown as time |
system.net.gve.queue.tx_event_counter
(count) | The number of event for this transmit queue (Linux only).
Shown as event |
system.net.gve.queue.tx_dma_mapping_error
(count) | The number of Direct Memory Access mapping errors for a transmit queue (Linux only).
Shown as error |
system.net.gve.tx_timeouts
(count) | The number of times a transmit queue has timeouted (Linux only).
Shown as time |
system.net.gve.rx_skb_alloc_fail
(count) | The number of socket buffer allocation failures for a receive queue (Linux only).
Shown as error |
system.net.gve.rx_buf_alloc_fail
(count) | The number of buffer allocation failures for a receive queue (Linux only).
Shown as error |
system.net.gve.rx_desc_err_dropped_pkt
(count) | The number of packets dropped due to descriptor error (Linux only).
Shown as packet |
system.net.gve.page_alloc_fail
(count) | The number of page allocation errors (Linux only).
Shown as error |
system.net.gve.dma_mapping_error
(count) | The number of Direct Memory Access mapping errors (Linux only).
Shown as error |
