Overview

Synthetic private locations come with a set of options you can configure to match your environment requirements. All options for the private location worker can be found by running the help command:

docker run --rm datadog/synthetics-private-location-worker --help

synthetics-pl-worker.exe --help

Customize your private location

Available parameters are listed below. These configuration options for private locations can be passed as parameters to your JSON configuration file or as arguments in the launch command, for example:

docker run --rm -v $PWD/<MY_WORKER_CONFIG_FILE_NAME>.json:/etc/datadog/synthetics-check-runner.json datadog/synthetics-private-location-worker:latest --logFormat=json

synthetics-pl-worker.exe --config=<PathToYourConfiguration> --logFormat=json

Arguments set in the launch command have precedence over the configuration file. However, these options are not stored and are consequently only relevant for a given launch.

Top configuration options

Datadog site configuration

site

Type: String
Default: datadoghq.com
Datadog site from which the private location pulls the test configuration and pushes the test results. Your site is .

DNS configuration

The following parameters can be used to customize DNS resolution on your API tests:

dnsUseHost

Type: Boolean
Default: true
Use host local DNS configuration first (for example, the configuration from your etc/resolv.conf file), then DNS servers specified in the dnsServer parameter.

dnsServer

Type: Array of Strings
Default: ["8.8.8.8","1.1.1.1"]
DNS servers IPs to use in given order (for example, --dnsServer="8.8.4.4" --dnsServer="8.8.8.8").

On browser tests, the DNS resolution is done directly by the browser, which usually reads DNS servers from the host. Alternatively, you can configure it at the container level (for example, using the --dns flag on Docker, or dnsConfig.nameservers on Kubernetes).

Proxy configuration

The following parameters can be used to configure a proxy to connect to Datadog:

proxyDatadog

Type: String
Default: none
Proxy URL used by the private location to send requests to Datadog (for example, --proxyDatadog=http://<YOUR_USER>:<YOUR_PWD>@<YOUR_IP>:<YOUR_PORT>).

proxyIgnoreSSLErrors

Type: Boolean
Default: false
Discard SSL errors when private location is using a proxy to send requests to Datadog.

proxyEnableConnectTunnel

Type: Boolean
Default: none
Enable HTTP CONNECT tunneling for HTTP proxies. When this option is not set, HTTP CONNECT tunneling is only used for HTTPS proxies.

Note: HTTP forward proxies like Squid may require the HTTP CONNECT request to establish the initial TCP connection between the private location and Datadog. As such, the proxyEnableConnectTunnel parameter should be set to true. However, reverse proxies like HAProxy that direct an HTTP CONNECT request to Datadog may not work with this option enabled.

Note: The proxy parameter is deprecated and should be replaced by proxyDatadog.

The following parameters can be used to configure a default proxy to use for Synthetic Monitoring tests:

proxyTestRequests

Type: String
Default: none
Proxy URL used by the private location to send test requests to the endpoint. PAC files are supported with the following syntax: pac+https://... or pac+http://....

Advanced configuration

concurrency

Type: Number
Default: 10
Maximum number of tests executed in parallel.

maxNumberMessagesToFetch

Type: Number
Default: 10
Maximum number of tests fetched from Datadog.

Note: Private Location containers output logs to stdout and stderr without saving them within the container.

All configuration options

--accessKey

Type: String
Default: none
Access key for Datadog API authentication.

--secretAccessKey

Type: String
Default: none
Secret access key for Datadog API authentication.

--datadogApiKey

Type: String
Default: none
Datadog API key to send browser tests artifacts (such as screenshots).

--privateKey

Type: Array
Default: none
Private key used to decrypt test configurations.

--publicKey

Type: Array
Default: none
Public key used by Datadog to encrypt test results. Composed of --publicKey.pem.

--site

Type: String
Default: datadoghq.com
Datadog site from which the private location pulls the test configuration and pushes the test results. Your site is .

--concurrency

Type: Number
Default: 10
Maximum number of tests executed in parallel.

--maxNumberMessagesToFetch

Type: Number
Default: 10
Maximum number of tests fetched from Datadog.

--proxyDatadog

Type: String
Default: none
Proxy URL used by the private location to send requests to Datadog (for example, --proxyDatadog=http://<YOUR_USER>:<YOUR_PWD>@<YOUR_IP>:<YOUR_PORT>).

--disableFipsCompliance

Type: Boolean
Default: false
Disables the FIPS compliance for a private location using ddog-gov.com. By default, Private Locations reporting to ddog-gov.com communicate to Datadog using FIPS-compliant encryption. The communication complies on the use of FIPS 140-2 validated Cryptographic Module - Certificate #4282. This option is required if you are using a Windows private location that reports to ddog-gov.com.

--dumpConfig

Type: Boolean
Default: none
Display worker configuration parameters without secrets.

--enableStatusProbes

Type: Boolean
Enables the readiness and liveness of private location probes. This enables two endpoints: http://127.0.0.1:8080/liveness and http://127.0.0.1:8080/readiness.

--statusProbesPort

Type: Number
Default: 8080
Overrides the port for the private location status probes.

--config

Type: String
Default: /etc/datadog/synthetics-check-runner.json
Windows: C:\ProgramData\Datadog-Synthetics\worker-config.json
Path to the JSON configuration file.

--proxyTestRequests

Type: String
Default: none
Proxy URL used by the private location to send test requests to the endpoint. PAC files are supported with the following syntax: pac+https://... or pac+http://....

--proxyIgnoreSSLErrors

Type: Boolean
Default: false
Discard SSL errors when private location is using a proxy to send requests to Datadog.

--dnsUseHost

Type: Boolean
Default: true
Use host local DNS configuration first (for example, the configuration from your etc/resolv.conf file), then DNS servers specified in the dnsServer parameter.

--dnsServer

Type: Array of Strings
Default: ["8.8.8.8","1.1.1.1"]
DNS servers IPs to use in given order (for example, --dnsServer="8.8.4.4" --dnsServer="8.8.8.8").

--variableOverride

Type: String
Overrides the variables used in tests running on the Private Location. Format: VARIABLE=value. All variables imported this way are obfuscated.

--environmentVariableOverride

Type: String
Overrides variables used in tests running on the Private Location with environment variables. It requires the environment variables to be imported in the containerized environment. With Docker, for example, docker run --env VARIABLE gcr.io/datadoghq/synthetics-private-location-worker --environmentVariableOverride VARIABLE. All variables imported this way are obfuscated.

--allowedIPRanges

Type: Array of Strings
Default: none
Grant access to specific IPs and/or CIDR among IP ranges blocked through --enableDefaultBlockedIpRanges or blockedIPRanges (for example, "allowedIPRanges.4": "10.0.0.0/8"). Note: allowedIPRanges has precedence over blockedIPRanges.

--blockedIPRanges

Type: Array of Strings
Default: none
Block access to specific IPs and/or CIDR in addition, or not, to the IP ranges blocked when setting the --enableDefaultBlockedIpRanges parameter to true (for example, --blockedIPRanges.4="127.0.0.0/8" --blockedIPRanges.6="::1/128".)

--enableDefaultBlockedIpRanges

Type: Boolean
Default: false
Prevent users from creating Synthetic tests on endpoints that are using reserved IP ranges (IANA IPv4 and IPv6 Special-Purpose Address Registry), except for those explicitly set with the --allowedIPRanges parameter.

--allowedDomainNames

Type: Array
Default: none
Grant access to domain names in test. Has precedence over –blockedDomainNames, for example: --allowedDomainNames="*.example.com".

--blockedDomainNames

Type: Array
Default: none
Deny access to domain names in tests, for example: --blockedDomainNames="example.org" --blockedDomainNames="*.com".

--enableIPv6

Type: Boolean
Default: false
Use IPv6 to perform tests. Note: IPv6 in Docker is only supported with a Linux host.

--version

Type: Boolean
Default: none
Show version number of the worker.

--logFormat

Type: String
Default: pretty
Format log output between "compact", "pretty", "pretty-compact", and "json". Setting your log format to json allows you to have these logs automatically parsed when collected by Datadog.

--verbosity

Type: Number
Default: 3
Verbosity level from 1 (errors only) to 4 (debug logs and above). Setting the verbosity from the command line is done with -v, -vv, -vvv, and -vvvv arguments.

Verbosity level	CLI argument	JSON config option
DEBUG	-vvvv	"verbosity": 4
INFO (default)	-vvv	"verbosity": 3
WARNING	-vv	"verbosity": 2
ERROR	-v	"verbosity": 1

--help

Type: Boolean
Default: none
Show the output for the help command.

Environment variables

Command options can also be set using environment variables such as DATADOG_API_KEY="...", DATADOG_WORKER_CONCURRENCY="15", DATADOG_DNS_USE_HOST="true". For options that accept multiple arguments, use JSON string array notation (DATADOG_TESTS_DNS_SERVER='["8.8.8.8", "1.1.1.1"]')

Supported environment variables:

DATADOG_ACCESS_KEY, DATADOG_API_KEY, DATADOG_PRIVATE_KEY, DATADOG_PUBLIC_KEY_PEM, DATADOG_SECRET_ACCESS_KEY, DATADOG_SITE, DATADOG_WORKER_CONCURRENCY, DATADOG_WORKER_LOG_FORMAT, DATADOG_WORKER_LOG_VERBOSITY, DATADOG_WORKER_MAX_NUMBER_MESSAGES_TO_FETCH, DATADOG_WORKER_PROXY, DATADOG_TESTS_DNS_SERVER, DATADOG_TESTS_DNS_USE_HOST, DATADOG_TESTS_PROXY, DATADOG_TESTS_PROXY_ENABLE_CONNECT_TUNNEL, DATADOG_TESTS_PROXY_IGNORE_SSL_ERRORS, DATADOG_ALLOWED_IP_RANGES_4, DATADOG_ALLOWED_IP_RANGES_6, DATADOG_BLOCKED_IP_RANGES_4, DATADOG_BLOCKED_IP_RANGES_6, DATADOG_ENABLE_DEFAULT_WINDOWS_FIREWALL_RULES, DATADOG_ALLOWED_DOMAIN_NAMES, DATADOG_BLOCKED_DOMAIN_NAMES, DATADOG_WORKER_ENABLE_STATUS_PROBES, DATADOG_WORKER_STATUS_PROBES_PORT

Further Reading

Documentation, liens et articles supplémentaires utiles:

Getting Started with Private LocationsDOCUMENTATION Dimension your private locationsDOCUMENTATION