Datadog OctoPrint

Supported OS Linux

통합 버전1.0.0

이 페이지는 아직 한국어로 제공되지 않으며 번역 작업 중입니다. 번역에 관한 질문이나 의견이 있으시면 언제든지 저희에게 연락해 주십시오.

Overview

This check monitors OctoPrint through the Datadog Agent.

Setup

Follow the instructions below to install and configure this check for an Agent running on a host. For containerized environments, see the Autodiscovery Integration Templates for guidance on applying these instructions.

Installation

To install the OctoPrint check on your host by running:

sudo -u dd-agent -- datadog-agent integration install datadog-octoprint==<VERSION>

Note: The VERSION is listed at the top of this page.

Install from source (optional)

Install the developer toolkit on any machine.
Run ddev release build octoprint to build the package.
Download the Datadog Agent.
Upload the build artifact to any host with an Agent and run datadog-agent integration install -w path/to/octoprint/dist/datadog_octoprint*.whl.

Configuration

From the OctoPrint web interface, create an API key for use with Datadog. This can be found within Settings –> Application Keys.
Edit the octoprint.d/conf.yaml file, in the conf.d/ folder at the root of your Agent’s configuration directory. Paste the OctoPrint API key as the value for octo_api_key. See the sample octoprint.d/conf.yaml for all available configuration options.
Restart the Agent.

Validation

Run the Agent’s status subcommand and look for octoprint under the Checks section.

Logs

By default this integration assumes that you are using the OctoPi image that is pre-configured to run OctoPrint from a Raspberry Pi.

The logs that it collects by default (and their default locations) are:

OctoPrint App log: /home/pi/.octoprint/logs
OctoPrint Webcam log: /var/log/webcamd.log
HA Proxy log: /var/log/haproxy.log

Any or all of these may be changed or removed by modifying the integration’s conf.yaml file.

Log processing

OctoPrint uses its own log format (not an object format). To make use of the logs, create a log processing pipeline with some parsing rules, for example:

Main Pipeline: “OctoPrint”
1. Sub Pipeline 1: “OctoPrint Print Job”
  1. Grok parser rule:
    - OctoPrint_Print_Job %{date("yyyy-MM-dd HH:mm:ss,SSS"):date}\s+-\s+%{notSpace:source}\s+-\s+%{word:level}\s+-\s+Print\s+job\s+%{notSpace:job_status}\s+-\s+%{data::keyvalue(":"," ,")}
2. Sub Pipeline 2: “General OctoPrint Log”
  1. Grok parser rule:
    - General_OctoPrint_Log %{date("yyyy-MM-dd HH:mm:ss,SSS"):date}\s+-\s+%{notSpace:source}\s+-\s+%{word:level}\s+-\s+%{data:message}

For more information, see the Datadog Log Processing documentation.

Data Collected

Metrics

octoprint.rpi_core_temp (gauge)	Temp (in C) of Raspberry Pi Core Shown as degree celsius
octoprint.printer_state (gauge)	Current state of OctoPrint Shown as operation
octoprint.est_print_time (gauge)	Estimated print time of current job Shown as minute
octoprint.pct_completed (gauge)	Percentage of current Print job completed Shown as percent
octoprint.print_job_time (gauge)	Elapsed print time Shown as minute
octoprint.print_job_time_left (gauge)	Estimated remaining print time Shown as minute
octoprint.current_tool_temp (gauge)	Temp (in C) of each extruder Shown as degree celsius
octoprint.target_tool_temp (gauge)	Target Temp (in C) of each extruder Shown as degree celsius
octoprint.current_bed_temp (gauge)	Temp (in C) of each printer bed Shown as degree celsius
octoprint.target_bed_temp (gauge)	Target Temp (in C) of each extruder Shown as degree celsius

Events

OctoPrint does not include any events.

Service Checks

octoprint.search
CRITICAL if the page can’t be accessed, WARNING if the search string isn’t found, or OK otherwise.
Statuses: ok, warning, critical

Troubleshooting

Need help? Contact Datadog support.