Containers

If you are using Docker containers, you have three options: using Docker, using the Datadog tracing library, or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: Datadog Tracing Library

Go embeds version control information in binaries since version 1.18. The Datadog tracing library uses this information to tag your telemetry with the latest commit SHA and repository URL.

Ensure your service meets the following requirements to use this approach:

• Go version is 1.18 or later.
• The service is built as a go module and the module path is your code’s repository URL.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have three options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: Datadog Tracing Library

Go embeds version control information in binaries since version 1.18. The Datadog tracing library uses this information to tag your telemetry with the latest commit SHA and repository URL.

Ensure your service meets the following requirements to use this approach:

• Go version is 1.18 or later.
• The service is built as a go module and the module path is your code’s repository URL.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, you have two options.

Option 1: Datadog Tracing Library

Go embeds version control information in binaries since version 1.18. The Datadog tracing library uses this information to tag your telemetry with the latest commit SHA and repository URL.

Ensure your service meets the following requirements to use this approach:

• Go version is 1.18 or later.
• The service is built as a go module and the module path is your code’s repository URL.

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Containers

If you are using Docker containers, you have three options: using Docker, using the Datadog tracing library, or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: Setuptools or Unified Python Project Settings File

If your application is packaged with setuptools:

1. Install the dd-trace package.
2. Add import ddtrace.sourcecode.setuptools_auto as the first import to the setup.py file.
3. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

If your application is using a unified Python project settings file:

1. Install the hatch-datadog-build-metadata plugin and configure it to embed git metadata. If a project already has URLs, reconfigure them as dynamic and move them to another configuration section. For more information, see the plugin source code.
2. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have three options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: Setuptools or Unified Python Project Settings File

If your application is packaged with setuptools:

1. Install the dd-trace package.
2. Add import ddtrace.sourcecode.setuptools_auto as the first import to the setup.py file.
3. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

If your application is using a unified Python project settings file:

1. Install the hatch-datadog-build-metadata plugin and configure it to embed git metadata. If a project already has URLs, reconfigure them as dynamic and move them to another configuration section. For more information, see the plugin source code.
2. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, you have two options.

Option 1: Setuptools or Unified Python Project Settings File

If your application is packaged with setuptools:

1. Install the dd-trace package.
2. Add import ddtrace.sourcecode.setuptools_auto as the first import to the setup.py file.
3. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

If your application is using a unified Python project settings file:

1. Install the hatch-datadog-build-metadata plugin and configure it to embed git metadata. If a project already has URLs, reconfigure them as dynamic and move them to another configuration section. For more information, see the plugin source code.
2. Set the DD_MAIN_PACKAGE environment variable as the name of the primary Python package.

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Containers

If you are using Docker containers, you have three options: using Docker, using Microsoft SourceLink, or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: Microsoft SourceLink

If you are using Microsoft SourceLink, Datadog can extract the git commit SHA and repository URL from your .NET assembly.

1. Open your project’s file (.csproj) in an IDE and add a reference to one of the following NuGet packages, depending on where your git repository is hosted:

   Provider	Microsoft SourceLink
   GitHub	Microsoft.SourceLink.GitHub
   Bitbucket	Microsoft.SourceLink.Bitbucket
   GitLab	Microsoft.SourceLink.GitLab
   Azure DevOps	Microsoft.SourceLink.AzureRepos.Git
   Azure DevOps Server	Microsoft.SourceLink.AzureDevOpsServer.Git

2. Ensure that your .pdb files are deployed alongside your .NET assemblies (.dll or .exe) in the same folder.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have three options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: Microsoft SourceLink

If you are using Microsoft SourceLink, Datadog can extract the git commit SHA and repository URL from your .NET assembly.

1. Open your project’s file (.csproj) in an IDE and add a reference to one of the following NuGet packages, depending on where your git repository is hosted:

   Provider	Microsoft SourceLink
   GitHub	Microsoft.SourceLink.GitHub
   Bitbucket	Microsoft.SourceLink.Bitbucket
   GitLab	Microsoft.SourceLink.GitLab
   Azure DevOps	Microsoft.SourceLink.AzureRepos.Git
   Azure DevOps Server	Microsoft.SourceLink.AzureDevOpsServer.Git

2. Ensure that your .pdb files are deployed alongside your .NET assemblies (.dll or .exe) in the same folder.

Option 3: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, you have two options: using Microsoft SourceLink or configuring your application with DD_GIT_* environment variables.

Option 1: Microsoft SourceLink

If you are using Microsoft SourceLink, Datadog can extract the git commit SHA and repository URL from your .NET assembly.

1. Open your project’s file (.csproj) in an IDE and add a reference to one of the following NuGet packages, depending on where your git repository is hosted:

   Provider	Microsoft SourceLink
   GitHub	Microsoft.SourceLink.GitHub
   Bitbucket	Microsoft.SourceLink.Bitbucket
   GitLab	Microsoft.SourceLink.GitLab
   Azure DevOps	Microsoft.SourceLink.AzureRepos.Git
   Azure DevOps Server	Microsoft.SourceLink.AzureDevOpsServer.Git

2. Ensure that your .pdb files are deployed alongside your .NET assemblies (.dll or .exe) in the same folder.

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Containers

If you are using Docker containers, you have two options: using Docker or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have two options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, configure your application with DD_GIT_* environment variables.

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Containers

If you are using Docker containers, you have two options: using Docker or configuring your application with the DD_TAGS environment variable.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_TAGS="git.repository_url:${DD_GIT_REPOSITORY_URL},git.commit.sha:${DD_GIT_COMMIT_SHA}"
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: DD_TAGS Environment Variable

Configure your application with the DD_TAGS environment variable:

export DD_TAGS="git.commit.sha:<commitSha>,git.repository_url:<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have two options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: DD_TAGS Environment Variable

Configure your application with the DD_TAGS environment variable:

export DD_TAGS="git.commit.sha:<commitSha>,git.repository_url:<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, configure your application with the DD_TAGS environment variable.

Configure your application with the DD_TAGS environment variable:

export DD_TAGS="git.commit.sha:<commitSha>,git.repository_url:<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

If you are using Docker containers, you have two options: using Docker or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Serverless

If you are using Serverless, you have two options depending on your serverless application’s setup.

Option 1: Datadog Tooling

Datadog CLI tool

Use the datadog-ci client version 2.4.1 or later. You must run the CLI tool in the same directory as the code repository.

Datadog Serverless Plugin

Use the plugin version 5.18.0 or later.

Datadog CDK Construct

Use the datadog-cdk-constructs version 0.8.5 or later for AWS CDK v1.
Use the datadog-cdk-constructs version 1.4.0 or later for AWS CDK v2.

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, configure your application with DD_GIT_* environment variables.

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

If you are using Docker containers, you have two options: using Docker or configuring your application with DD_GIT_* environment variables.

Option 1: Docker

1. Add the following lines to your application’s Dockerfile:

   ARG DD_GIT_REPOSITORY_URL
   ARG DD_GIT_COMMIT_SHA
   ENV DD_GIT_REPOSITORY_URL=${DD_GIT_REPOSITORY_URL} 
   ENV DD_GIT_COMMIT_SHA=${DD_GIT_COMMIT_SHA}
   

2. Add the following arguments to your Docker build command:

   docker build . \
    -t my-application \
    --build-arg DD_GIT_REPOSITORY_URL=<git-provider.example/me/my-repo> \
    --build-arg DD_GIT_COMMIT_SHA=$(git rev-parse HEAD)
   

Option 2: DD_GIT_* Environment Variables

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Host

If you are using a host, configure your application with DD_GIT_* environment variables.

Configure your application with the DD_GIT_* environment variables:

export DD_GIT_COMMIT_SHA="<commitSha>"
export DD_GIT_REPOSITORY_URL="<git-provider.example/me/my-repo>"

Replace <commitSha> with the commit SHA used to build your application. You can retrieve this by running git rev-parse HEAD at build time, and it needs to be passed into the runtime environment variables.

Install Datadog’s GitHub integration on the GitHub integration tile to allow Datadog to synchronize your repository metadata automatically. When specifying permissions on the integration tile, select at least Read permissions for Contents.

Setting up the GitHub integration also allows you to see inline code snippets in Error Tracking, Continuous Profiler, Serverless Monitoring, CI Visibility, and Application Security Monitoring.

To link telemetry with your source code, upload your repository metadata with the datadog-ci git-metadata upload command.

When you run datadog-ci git-metadata upload within a Git repository, Datadog receives the repository URL, the commit SHA of the current branch, and a list of tracked file paths.

Run this command for every commit that you need to be synchronized with Datadog.

If you are using gitlab.com, this also allows you to see inline code snippets in Error Tracking, Continuous Profiler, Serverless Monitoring, CI Visibility, and Application Security Monitoring.

Validation

To ensure the data is being collected, run datadog-ci git-metadata upload in your CI pipeline.

You can expect to see the following output:

Reporting commit 007f7f466e035b052415134600ea899693e7bb34 from repository git@my-git-server.com:my-org/my-repository.git.
180 tracked file paths will be reported.
✅  Handled in 0.077 seconds.

To link telemetry with your source code, upload your repository metadata with the datadog-ci git-metadata upload command.

When you run datadog-ci git-metadata upload within a Git repository, Datadog receives the repository URL, the commit SHA of the current branch, and a list of tracked file paths.

Run this command for every commit that you need to be synchronized with Datadog.

Validation

To ensure the data is being collected, run datadog-ci git-metadata upload in your CI pipeline.

You can expect to see the following output:

Reporting commit 007f7f466e035b052415134600ea899693e7bb34 from repository git@my-git-server.com:my-org/my-repository.git.
180 tracked file paths will be reported.
✅  Handled in 0.077 seconds.

You can see links from stack frames to their source repository in Error Tracking.

1. Navigate to APM > Error Tracking.
2. Click on an issue. The Issue Details panel appears on the right.
3. Under Latest Event, click the View button on the right of a frame or select View file, View Git blame, or View commit to be redirected to your source code management tool.

If you’re using the GitHub integration, or if you’re hosting your repositories on the GitLab SaaS instance (gitlab.com), click Connect to preview on stack frames. You can see inline code snippets directly in the stack trace.

You can see a source code preview for profile frames in the Continuous Profiler.

1. Navigate to APM > Profile Search.
2. Hover your cursor over a method in the flame graph.
3. If needed, press Opt or Alt to enable the preview.

You can also see links from profile frames to their source repository. This is supported for profiles broken down by line, method, or file.

1. Navigate to APM > Profile Search.
2. Hover your cursor over a method in the flame graph. A kebab icon with the More actions label appears on the right.
3. Click More actions > View in repo to open the trace in its source code repository.

You can see links from errors in your Lambda functions’ associated stack traces to their source repository in Serverless Monitoring.

1. Navigate to Infrastructure > Serverless and click on the AWS tab.
2. Click on a Lambda function and click the Open Trace button for an invocation with an associated stack trace.
3. Click View Code to open the error in its source code repository.

If you’re using the GitHub integration, click Connect to preview on error frames. You can see inline code snippets directly in the Lambda function’s stack trace.

You can see links from failed test runs to their source repository in Test Visibility.

1. Navigate to Software Delivery > Test Visibility > Test Runs and select a failed test run.
2. Click the View on GitHub button to open the test in its source code repository.

For more information, see Enhancing Developer Workflows with Datadog.

You can see links from failed Static Analysis and Software Composition Analysis scans to their source repository in Code Analysis.

1. Navigate to Software Delivery > Code Analysis and select a repository.
2. In the Code Vulnerabilities or Code Quality view, click on a code vulnerability or violation. In the Details section, click the View Code button to open the flagged code in its source code repository.

For more information, see the Code Analysis documentation.

You can see links from errors in your security signals’ associated stack traces to their source repository in Application Security Monitoring.

1. Navigate to Security > Application Security and select a security signal.
2. Scroll down to the Traces section on the Related Signals tab and click on an associated stack trace.
3. Click View Code to open the error in its source code repository.

If you’re using the GitHub integration, click Connect to preview on error frames. You can see inline code snippets directly in the security signal’s stack trace.