aws_vpc_nat_gateway

account_id

Type: STRING

connectivity_type

Type: STRING
Provider name: ConnectivityType
Description: Indicates whether the NAT gateway supports public or private connectivity.

create_time

Type: TIMESTAMP
Provider name: CreateTime
Description: The date and time the NAT gateway was created.

delete_time

Type: TIMESTAMP
Provider name: DeleteTime
Description: The date and time the NAT gateway was deleted, if applicable.

failure_code

Type: STRING
Provider name: FailureCode
Description: If the NAT gateway could not be created, specifies the error code for the failure. (InsufficientFreeAddressesInSubnet | Gateway.NotAttached | InvalidAllocationID.NotFound | Resource.AlreadyAssociated | InternalError | InvalidSubnetID.NotFound)

failure_message

Type: STRING
Provider name: FailureMessage
Description: If the NAT gateway could not be created, specifies the error message for the failure, that corresponds to the error code.

• For InsufficientFreeAddressesInSubnet: “Subnet has insufficient free addresses to create this NAT gateway”
• For Gateway.NotAttached: “Network vpc-xxxxxxxx has no Internet gateway attached”
• For InvalidAllocationID.NotFound: “Elastic IP address eipalloc-xxxxxxxx could not be associated with this NAT gateway”
• For Resource.AlreadyAssociated: “Elastic IP address eipalloc-xxxxxxxx is already associated”
• For InternalError: “Network interface eni-xxxxxxxx, created and used internally by this NAT gateway is in an invalid state. Please try again.”
• For InvalidSubnetID.NotFound: “The specified subnet subnet-xxxxxxxx does not exist or could not be found.”

nat_gateway_addresses

Type: UNORDERED_LIST_STRUCT
Provider name: NatGatewayAddresses
Description: Information about the IP addresses and network interface associated with the NAT gateway.

• allocation_id
  Type: STRING
  Provider name: AllocationId
  Description: [Public NAT gateway only] The allocation ID of the Elastic IP address that’s associated with the NAT gateway.
  
• association_id
  Type: STRING
  Provider name: AssociationId
  Description: [Public NAT gateway only] The association ID of the Elastic IP address that’s associated with the NAT gateway.
  
• failure_message
  Type: STRING
  Provider name: FailureMessage
  Description: The address failure message.
  
• is_primary
  Type: BOOLEAN
  Provider name: IsPrimary
  Description: Defines if the IP address is the primary address.
  
• network_interface_id
  Type: STRING
  Provider name: NetworkInterfaceId
  Description: The ID of the network interface associated with the NAT gateway.
  
• private_ip
  Type: STRING
  Provider name: PrivateIp
  Description: The private IP address associated with the NAT gateway.
  
• public_ip
  Type: STRING
  Provider name: PublicIp
  Description: [Public NAT gateway only] The Elastic IP address associated with the NAT gateway.
  
• status
  Type: STRING
  Provider name: Status
  Description: The address status.
  

nat_gateway_arn

Type: STRING

nat_gateway_id

Type: STRING
Provider name: NatGatewayId
Description: The ID of the NAT gateway.

provisioned_bandwidth

Type: STRUCT
Provider name: ProvisionedBandwidth
Description: Reserved. If you need to sustain traffic greater than the documented limits, contact Amazon Web Services Support.

• provision_time
  Type: TIMESTAMP
  Provider name: ProvisionTime
  Description: Reserved.
  
• provisioned
  Type: STRING
  Provider name: Provisioned
  Description: Reserved.
  
• request_time
  Type: TIMESTAMP
  Provider name: RequestTime
  Description: Reserved.
  
• requested
  Type: STRING
  Provider name: Requested
  Description: Reserved.
  
• status
  Type: STRING
  Provider name: Status
  Description: Reserved.
  

state

Type: STRING
Provider name: State
Description: The state of the NAT gateway.

• pending: The NAT gateway is being created and is not ready to process traffic.
• failed: The NAT gateway could not be created. Check the failureCode and failureMessage fields for the reason.
• available: The NAT gateway is able to process traffic. This status remains until you delete the NAT gateway, and does not indicate the health of the NAT gateway.
• deleting: The NAT gateway is in the process of being terminated and may still be processing traffic.
• deleted: The NAT gateway has been terminated and is no longer processing traffic.

subnet_id

Type: STRING
Provider name: SubnetId
Description: The ID of the subnet in which the NAT gateway is located.

tags

Type: UNORDERED_LIST_STRING

vpc_id

Type: STRING
Provider name: VpcId
Description: The ID of the VPC in which the NAT gateway is located.