이 페이지는 아직 한국어로 제공되지 않으며 번역 작업 중입니다. 번역에 관한 질문이나 의견이 있으시면 언제든지 저희에게 연락해 주십시오.

aws_elbv2_load_balancer

`account_id`

Type: STRING

`attributes`

Type: UNORDERED_LIST_STRUCT
Provider name: Attributes
Description: Information about the load balancer attributes.

key
Type: STRING
Provider name: Key
Description: The name of the attribute. The following attributes are supported by all load balancers:
- deletion_protection.enabled - Indicates whether deletion protection is enabled. The value is true or false. The default is false.
- load_balancing.cross_zone.enabled - Indicates whether cross-zone load balancing is enabled. The possible values are true and false. The default for Network Load Balancers and Gateway Load Balancers is false. The default for Application Load Balancers is true, and cannot be changed.
The following attributes are supported by both Application Load Balancers and Network Load Balancers:
- access_logs.s3.enabled - Indicates whether access logs are enabled. The value is true or false. The default is false.
- access_logs.s3.bucket - The name of the S3 bucket for the access logs. This attribute is required if access logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket.
- access_logs.s3.prefix - The prefix for the location in the S3 bucket for the access logs.
- ipv6.deny_all_igw_traffic - Blocks internet gateway (IGW) access to the load balancer. It is set to false for internet-facing load balancers and true for internal load balancers, preventing unintended access to your internal load balancer through an internet gateway.
The following attributes are supported by only Application Load Balancers:
- idle_timeout.timeout_seconds - The idle timeout value, in seconds. The valid range is 1-4000 seconds. The default is 60 seconds.
- client_keep_alive.seconds - The client keep alive value, in seconds. The valid range is 60-604800 seconds. The default is 3600 seconds.
- connection_logs.s3.enabled - Indicates whether connection logs are enabled. The value is true or false. The default is false.
- connection_logs.s3.bucket - The name of the S3 bucket for the connection logs. This attribute is required if connection logs are enabled. The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permissions to write to the bucket.
- connection_logs.s3.prefix - The prefix for the location in the S3 bucket for the connection logs.
- routing.http.desync_mitigation_mode - Determines how the load balancer handles requests that might pose a security risk to your application. The possible values are monitor, defensive, and strictest. The default is defensive.
- routing.http.drop_invalid_header_fields.enabled - Indicates whether HTTP headers with invalid header fields are removed by the load balancer (true) or routed to targets (false). The default is false.
- routing.http.preserve_host_header.enabled - Indicates whether the Application Load Balancer should preserve the Host header in the HTTP request and send it to the target without any change. The possible values are true and false. The default is false.
- routing.http.x_amzn_tls_version_and_cipher_suite.enabled - Indicates whether the two headers (x-amzn-tls-version and x-amzn-tls-cipher-suite), which contain information about the negotiated TLS version and cipher suite, are added to the client request before sending it to the target. The x-amzn-tls-version header has information about the TLS protocol version negotiated with the client, and the x-amzn-tls-cipher-suite header has information about the cipher suite negotiated with the client. Both headers are in OpenSSL format. The possible values for the attribute are true and false. The default is false.
- routing.http.xff_client_port.enabled - Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer. The possible values are true and false. The default is false.
- routing.http.xff_header_processing.mode - Enables you to modify, preserve, or remove the X-Forwarded-For header in the HTTP request before the Application Load Balancer sends the request to the target. The possible values are append, preserve, and remove. The default is append.
  - If the value is append, the Application Load Balancer adds the client IP address (of the last hop) to the X-Forwarded-For header in the HTTP request before it sends it to targets.
  - If the value is preserve the Application Load Balancer preserves the X-Forwarded-For header in the HTTP request, and sends it to targets without any change.
  - If the value is remove, the Application Load Balancer removes the X-Forwarded-For header in the HTTP request before it sends it to targets.
- routing.http2.enabled - Indicates whether HTTP/2 is enabled. The possible values are true and false. The default is true. Elastic Load Balancing requires that message header names contain only alphanumeric characters and hyphens.
- waf.fail_open.enabled - Indicates whether to allow a WAF-enabled load balancer to route requests to targets if it is unable to forward the request to Amazon Web Services WAF. The possible values are true and false. The default is false.
The following attributes are supported by only Network Load Balancers:
- dns_record.client_routing_policy - Indicates how traffic is distributed among the load balancer Availability Zones. The possible values are availability_zone_affinity with 100 percent zonal affinity, partial_availability_zone_affinity with 85 percent zonal affinity, and any_availability_zone with 0 percent zonal affinity.
value
Type: STRING
Provider name: Value
Description: The value of the attribute.

`availability_zones`

Type: UNORDERED_LIST_STRUCT
Provider name: AvailabilityZones
Description: The subnets for the load balancer.

load_balancer_addresses
Type: UNORDERED_LIST_STRUCT
Provider name: LoadBalancerAddresses
Description: [Network Load Balancers] If you need static IP addresses for your load balancer, you can specify one Elastic IP address per Availability Zone when you create an internal-facing load balancer. For internal load balancers, you can specify a private IP address from the IPv4 range of the subnet.
- allocation_id
  Type: STRING
  Provider name: AllocationId
  Description: [Network Load Balancers] The allocation ID of the Elastic IP address for an internal-facing load balancer.
- i_pv6_address
  Type: STRING
  Provider name: IPv6Address
  Description: [Network Load Balancers] The IPv6 address.
- ip_address
  Type: STRING
  Provider name: IpAddress
  Description: The static IP address.
- private_ipv4_address
  Type: STRING
  Provider name: PrivateIPv4Address
  Description: [Network Load Balancers] The private IPv4 address for an internal load balancer.
outpost_id
Type: STRING
Provider name: OutpostId
Description: [Application Load Balancers on Outposts] The ID of the Outpost.
subnet_id
Type: STRING
Provider name: SubnetId
Description: The ID of the subnet. You can specify one subnet per Availability Zone.
zone_name
Type: STRING
Provider name: ZoneName
Description: The name of the Availability Zone.

`canonical_hosted_zone_id`

Type: STRING
Provider name: CanonicalHostedZoneId
Description: The ID of the Amazon Route 53 hosted zone associated with the load balancer.

`created_time`

Type: TIMESTAMP
Provider name: CreatedTime
Description: The date and time the load balancer was created.

`customer_owned_ipv4_pool`

Type: STRING
Provider name: CustomerOwnedIpv4Pool
Description: [Application Load Balancers on Outposts] The ID of the customer-owned address pool.

`dns_name`

Type: STRING
Provider name: DNSName
Description: The public DNS name of the load balancer.

`enforce_inbound_rules_on_private_link_traffic`

Type: STRING
Provider name: EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic
Description: Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink.

`ip_address_type`

Type: STRING
Provider name: IpAddressType
Description: [Application Load Balancers] The type of IP addresses used for public or private connections by the subnets attached to your load balancer. The possible values are ipv4 (for only IPv4 addresses), dualstack (for IPv4 and IPv6 addresses), and dualstack-without-public-ipv4 (for IPv6 only public addresses, with private IPv4 and IPv6 addresses). [Network Load Balancers and Gateway Load Balancers] The type of IP addresses used for public or private connections by the subnets attached to your load balancer. The possible values are ipv4 (for only IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses).

`listeners`

Type: UNORDERED_LIST_STRUCT
Provider name: Listeners
Description: Information about the listeners.

alpn_policy
Type: UNORDERED_LIST_STRING
Provider name: AlpnPolicy
Description: [TLS listener] The name of the Application-Layer Protocol Negotiation (ALPN) policy.
certificates
Type: UNORDERED_LIST_STRUCT
Provider name: Certificates
Description: [HTTPS or TLS listener] The default certificate for the listener.
- certificate_arn
  Type: STRING
  Provider name: CertificateArn
  Description: The Amazon Resource Name (ARN) of the certificate.
- is_default
  Type: BOOLEAN
  Provider name: IsDefault
  Description: Indicates whether the certificate is the default certificate. Do not set this value when specifying a certificate as an input. This value is not included in the output when describing a listener, but is included when describing listener certificates.
default_actions
Type: UNORDERED_LIST_STRUCT
Provider name: DefaultActions
Description: The default actions for the listener.
- authenticate_cognito_config
  Type: STRUCT
  Provider name: AuthenticateCognitoConfig
  Description: [HTTPS listeners] Information for using Amazon Cognito to authenticate users. Specify only when Type is authenticate-cognito.
  - authentication_request_extra_params
    Type: MAP_STRING_STRING
    Provider name: AuthenticationRequestExtraParams
    Description: The query parameters (up to 10) to include in the redirect request to the authorization endpoint.
  - on_unauthenticated_request
    Type: STRING
    Provider name: OnUnauthenticatedRequest
    Description: The behavior if the user is not authenticated. The following are possible values:
    - deny - Return an HTTP 401 Unauthorized error.
    - allow - Allow the request to be forwarded to the target.
    - authenticate - Redirect the request to the IdP authorization endpoint. This is the default value.
  - scope Type: STRING Provider name: Scope Description: The set of user claims to be requested from the IdP. The default is openid. To verify which scope values your IdP supports and how to separate multiple values, see the documentation for your IdP.
  - session_cookie_name Type: STRING Provider name: SessionCookieName Description: The name of the cookie used to maintain session information. The default is AWSELBAuthSessionCookie.
  - session_timeout Type: INT64 Provider name: SessionTimeout Description: The maximum duration of the authentication session, in seconds. The default is 604800 seconds (7 days).
  - user_pool_arn Type: STRING Provider name: UserPoolArn Description: The Amazon Resource Name (ARN) of the Amazon Cognito user pool.
  - user_pool_client_id Type: STRING Provider name: UserPoolClientId Description: The ID of the Amazon Cognito user pool client.
  - user_pool_domain Type: STRING Provider name: UserPoolDomain Description: The domain prefix or fully-qualified domain name of the Amazon Cognito user pool.
- authenticate_oidc_config Type: STRUCT Provider name: AuthenticateOidcConfig Description: [HTTPS listeners] Information about an identity provider that is compliant with OpenID Connect (OIDC). Specify only when Type is authenticate-oidc. authentication_request_extra_params Type: MAP_STRING_STRING Provider name: AuthenticationRequestExtraParams Description: The query parameters (up to 10) to include in the redirect request to the authorization endpoint. authorization_endpoint Type: STRING Provider name: AuthorizationEndpoint Description: The authorization endpoint of the IdP. This must be a full URL, including the HTTPS protocol, the domain, and the path. client_id Type: STRING Provider name: ClientId Description: The OAuth 2.0 client identifier. client_secret Type: STRING Provider name: ClientSecret Description: The OAuth 2.0 client secret. This parameter is required if you are creating a rule. If you are modifying a rule, you can omit this parameter if you set UseExistingClientSecret to true. issuer Type: STRING Provider name: Issuer Description: The OIDC issuer identifier of the IdP. This must be a full URL, including the HTTPS protocol, the domain, and the path. on_unauthenticated_request Type: STRING Provider name: OnUnauthenticatedRequest Description: The behavior if the user is not authenticated. The following are possible values:deny - Return an HTTP 401 Unauthorized error. allow - Allow the request to be forwarded to the target. authenticate - Redirect the request to the IdP authorization endpoint. This is the default value. scope Type: STRING Provider name: Scope Description: The set of user claims to be requested from the IdP. The default is openid. To verify which scope values your IdP supports and how to separate multiple values, see the documentation for your IdP. session_cookie_name Type: STRING Provider name: SessionCookieName Description: The name of the cookie used to maintain session information. The default is AWSELBAuthSessionCookie. session_timeout Type: INT64 Provider name: SessionTimeout Description: The maximum duration of the authentication session, in seconds. The default is 604800 seconds (7 days). token_endpoint Type: STRING Provider name: TokenEndpoint Description: The token endpoint of the IdP. This must be a full URL, including the HTTPS protocol, the domain, and the path. use_existing_client_secret Type: BOOLEAN Provider name: UseExistingClientSecret Description: Indicates whether to use the existing client secret when modifying a rule. If you are creating a rule, you can omit this parameter or set it to false. user_info_endpoint Type: STRING Provider name: UserInfoEndpoint Description: The user info endpoint of the IdP. This must be a full URL, including the HTTPS protocol, the domain, and the path.
- fixed_response_config Type: STRUCT Provider name: FixedResponseConfig Description: [Application Load Balancer] Information for creating an action that returns a custom HTTP response. Specify only when Type is fixed-response. content_type Type: STRING Provider name: ContentType Description: The content type. Valid Values: text/plain | text/css | text/html | application/javascript | application/json message_body Type: STRING Provider name: MessageBody Description: The message. status_code Type: STRING Provider name: StatusCode Description: The HTTP response code (2XX, 4XX, or 5XX).
- forward_config Type: STRUCT Provider name: ForwardConfig Description: Information for creating an action that distributes requests among one or more target groups. For Network Load Balancers, you can specify a single target group. Specify only when Type is forward. If you specify both ForwardConfig and TargetGroupArn, you can specify only one target group using ForwardConfig and it must be the same target group specified in TargetGroupArn. target_group_stickiness_config Type: STRUCT Provider name: TargetGroupStickinessConfig Description: The target group stickiness for the rule. duration_seconds Type: INT32 Provider name: DurationSeconds Description: The time period, in seconds, during which requests from a client should be routed to the same target group. The range is 1-604800 seconds (7 days). enabled Type: BOOLEAN Provider name: Enabled Description: Indicates whether target group stickiness is enabled. target_groups Type: UNORDERED_LIST_STRUCT Provider name: TargetGroups Description: The target groups. For Network Load Balancers, you can specify a single target group. target_group_arn Type: STRING Provider name: TargetGroupArn Description: The Amazon Resource Name (ARN) of the target group. weight Type: INT32 Provider name: Weight Description: The weight. The range is 0 to 999.
- order Type: INT32 Provider name: Order Description: The order for the action. This value is required for rules with multiple actions. The action with the lowest value for order is performed first.
- redirect_config Type: STRUCT Provider name: RedirectConfig Description: [Application Load Balancer] Information for creating a redirect action. Specify only when Type is redirect. host Type: STRING Provider name: Host Description: The hostname. This component is not percent-encoded. The hostname can contain #{host}. path Type: STRING Provider name: Path Description: The absolute path, starting with the leading “/”. This component is not percent-encoded. The path can contain #{host}, #{path}, and #{port}. port Type: STRING Provider name: Port Description: The port. You can specify a value from 1 to 65535 or #{port}. protocol Type: STRING Provider name: Protocol Description: The protocol. You can specify HTTP, HTTPS, or #{protocol}. You can redirect HTTP to HTTP, HTTP to HTTPS, and HTTPS to HTTPS. You cannot redirect HTTPS to HTTP. query Type: STRING Provider name: Query Description: The query parameters, URL-encoded when necessary, but not percent-encoded. Do not include the leading “?”, as it is automatically added. You can specify any of the reserved keywords. status_code Type: STRING Provider name: StatusCode Description: The HTTP redirect code. The redirect is either permanent (HTTP 301) or temporary (HTTP 302).
- target_group_arn Type: STRING Provider name: TargetGroupArn Description: The Amazon Resource Name (ARN) of the target group. Specify only when Type is forward and you want to route to a single target group. To route to one or more target groups, use ForwardConfig instead.
- type Type: STRING Provider name: Type Description: The type of action.
listener_arn Type: STRING Provider name: ListenerArn Description: The Amazon Resource Name (ARN) of the listener.
load_balancer_arn Type: STRING Provider name: LoadBalancerArn Description: The Amazon Resource Name (ARN) of the load balancer.
mutual_authentication Type: STRUCT Provider name: MutualAuthentication Description: The mutual authentication configuration information. ignore_client_certificate_expiry Type: BOOLEAN Provider name: IgnoreClientCertificateExpiry Description: Indicates whether expired client certificates are ignored. mode Type: STRING Provider name: Mode Description: The client certificate handling method. Options are off, passthrough or verify. The default value is off. trust_store_arn Type: STRING Provider name: TrustStoreArn Description: The Amazon Resource Name (ARN) of the trust store. trust_store_association_status Type: STRING Provider name: TrustStoreAssociationStatus Description: Indicates a shared trust stores association status.
port Type: INT32 Provider name: Port Description: The port on which the load balancer is listening.
protocol Type: STRING Provider name: Protocol Description: The protocol for connections from clients to the load balancer.
ssl_policy Type: STRING Provider name: SslPolicy Description: [HTTPS or TLS listener] The security policy that defines which protocols and ciphers are supported.

`load_balancer_arn`

Type: STRING Provider name: LoadBalancerArn Description: The Amazon Resource Name (ARN) of the load balancer.

`load_balancer_name`

Type: STRING Provider name: LoadBalancerName Description: The name of the load balancer.

`scheme`

Type: STRING Provider name: Scheme Description: The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes. Therefore, Internet-facing load balancers can route requests from clients over the internet. The nodes of an internal load balancer have only private IP addresses. The DNS name of an internal load balancer is publicly resolvable to the private IP addresses of the nodes. Therefore, internal load balancers can route requests only from clients with access to the VPC for the load balancer.

`security_groups`

Type: UNORDERED_LIST_STRING Provider name: SecurityGroups Description: The IDs of the security groups for the load balancer.

`state`

Type: STRUCT Provider name: State Description: The state of the load balancer.

code Type: STRING Provider name: Code Description: The state code. The initial state of the load balancer is provisioning. After the load balancer is fully set up and ready to route traffic, its state is active. If load balancer is routing traffic but does not have the resources it needs to scale, its state isactive_impaired. If the load balancer could not be set up, its state is failed.
reason Type: STRING Provider name: Reason Description: A description of the state.

`tags`

Type: UNORDERED_LIST_STRING

`type`

Type: STRING Provider name: Type Description: The type of load balancer.

`vpc_id`

Type: STRING Provider name: VpcId Description: The ID of the VPC for the load balancer.